You bring up a good point about the vesa drivers. I'll give them a shot tonight. The optiplex 320s are giving me about 20us latency. Thats good enough to software step one of my machines and I have a new mesa 5i25 for the other. But the 200ms latency would screw up the servo thread even if hardware stepping.
On Thu, Mar 8, 2012 at 3:34 PM, Kirk Wallace <kwall...@wallacecompany.com>wrote: > On Thu, 2012-03-08 at 12:27 -0800, Kirk Wallace wrote: > ... snip > > and added memory for 512MB total. I also needed to edit xorg.conf to add > > monitor refresh rate and resolution. They have decent latency at 38000 > > nS (38 uS). > ... snip > > Well in looking further 38000ns is not really very good, but I'm going > to use these anyway. Maybe with some work I can improve this. > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/index.html > California, USA > > > > ------------------------------------------------------------------------------ > Virtualization & Cloud Management Using Capacity Planning > Cloud computing makes use of virtualization - but cloud computing > also focuses on allowing computing to be delivered as a service. > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
