On Sat, 17 Mar 2012, Peter C. Wallace wrote: > Date: Sat, 17 Mar 2012 13:33:56 -0700 (PDT) > From: Peter C. Wallace <p...@mesanet.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] Smart-serial and 7i43 > > On Sat, 17 Mar 2012, Viesturs L?cis wrote: > >> Date: Sat, 17 Mar 2012 16:29:27 -0400 >> From: "[UTF-8] Viesturs L?cis" <viesturs.la...@gmail.com> >> Reply-To: "Enhanced Machine Controller (EMC)" >> <emc-users@lists.sourceforge.net> >> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> >> Subject: Re: [Emc-users] Smart-serial and 7i43 >> >> 2012/3/17 Peter C. Wallace <p...@mesanet.com>: >>> >>> Looks right, though it probably should have the right number of 0's or X's >>> for >>> the number of sserial channels the config contains >> >> How do I find that out? The firmware is BOSSV.BIT, the one You sent to >> John Murphy a week or two ago. >> >>> what does dmesg say? >> >> I copied only the part, which is usually in the error message: >> [ 102.975901] I-pipe: Domain RTAI registered. >> [ 102.975913] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. >> [ 102.975916] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu >> 4.4.3-4ubuntu5) . >> [ 102.975923] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE >> (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). >> [ 102.975925] PIPELINE layers: >> [ 102.975929] f81efe20 9ac15d93 RTAI 200 >> [ 102.975932] c085cb20 0 Linux 100 >> [ 103.004497] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>. >> [ 103.004681] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with >> RTAI OWN KTASKs>, kstacks pool size = 524288 bytes. >> [ 103.004686] RTAI[sched]: hard timer type/freq = APIC/12557095(Hz); >> default timing: periodic; linear timed lists. >> [ 103.004690] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq >> = 1808082000 hz. >> [ 103.004693] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns. >> [ 103.004822] RTAI[usi]: enabled. >> [ 103.095251] RTAI[math]: loaded. >> [ 103.327291] hm2: loading Mesa HostMot2 driver version 0.15 >> [ 103.333112] hm2_7i43: loading HostMot2 Mesa 7i43 driver version 0.3 >> [ 103.335184] hm2_7i43.0: firmware: requesting hm2/7i43-4/BOSSV.BIT >> [ 103.792562] hm2/hm2_7i43.0: inconsistent Module Descriptor for >> Smart Serial Interface, not loading driver >> [ 103.792571] hm2/hm2_7i43.0: Version = 0, expected 0 >> [ 103.792576] hm2/hm2_7i43.0: NumRegisters = 5, expected 6 >> [ 103.792581] hm2/hm2_7i43.0: InstanceStride = 0x00000004, >> expected 0x00000040 >> [ 103.792586] hm2/hm2_7i43.0: MultipleRegisters = 0x0000001F, >> expected 0x0000003C >> [ 103.792590] hm2/hm2_7i43.0: inconsistent Module Descriptor! >> [ 103.792595] hm2/hm2_7i43.0: failed to parse Module Descriptor 5 >> [ 103.792605] hm2_7i43.0: board at (ioaddr=0x0378, ioaddr_hi=0x0778, >> epp_wide ON) not found! >> [ 104.221146] hm2: unloading >> [ 104.365422] RTAI[math]: unloaded. >> [ 104.424819] SCHED releases registered named ALIEN RTGLBH >> [ 104.440290] RTAI[malloc]: unloaded. >> [ 104.540035] RTAI[sched]: unloaded (forced hard/soft/hard >> transitions: traps 0, syscalls 0). >> [ 104.543841] I-pipe: Domain RTAI unregistered. >> [ 104.543853] RTAI[hal]: unmounted. >> viesturs@ubuntu:~/linuxcnc-dev$ >> >> >>> is this 2.5? >> >> Freshly (less than 2 hours ago) built from master. Still warm :)) >> >> Viesturs
Those number do not match what I have for the BOSSVSS config so that is not a current bit file (John Murphy must have sent you an old one by mistake) Configuration Name: HOSTMOT2 General configuration information: Module: SSerial There are 1 of SSerial in configuration Version: 0 Registers: 6 BaseAddress: 5A00 ClockFrequency: 50.000 MHz note the # of registers ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
