2012/3/17 Peter C. Wallace <[email protected]>: > > I cannot see how any of those errors are eveny vaguely related to the > bitfile
I do understand that. The fact is that it works with this: CONFIG="firmware=hm2/7i43/SVST4_4B.BIT num_encoders=3 num_pwmgens=3 num_stepgens=0" It does not work with this: CONFIG="firmware=hm2/7i43-4/BOSSV.BIT num_encoders=1 sserial_port_0=00" It even works with this: CONFIG="firmware=hm2/7i43-4/SVST4_4.BIT num_encoders=3 sserial_port_0=00" (wrong firmware, but requested to load sserial module). I tried in the same INI file (hm2-servo sample config) - commented out one, uncommented the other and vice versa. If it would be something wrong in HAL file, it would display appropriate message - if particular pin did not exist etc. But the error I receive is something totally out of anything I have ever seen. Could You, please, confirm, if the syntax for loading sserial module is correct? Viesturs ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
