Viesturs, Thanks!
Tony
----- Original Message -----
From: "Viesturs Lacis" <viesturs.la...@gmail.com>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Sent: Sunday, March 18, 2012 3:36 AM
Subject: Re: [Emc-users] Tool change question
2012/3/18 Tony Zampini <zampi...@cox.net>:
>
> There is a reference to the name in the script itself:
>
> h = hal.component("hal_manualtoolchange")
>
> Do I need to change the name here too?
>
> Also, in the .ini file, the name appears in four places:
>
> loadusr -W hal_manualtoolchange
> net tool-change iocontrol.0.tool-change => hal_manualtoolchange.change
> net tool-changed iocontrol.0.tool-changed <=
> hal_manualtoolchange.changed
> net tool-number iocontrol.0.tool-prep-number =>
> hal_manualtoolchange.number
> net tool-prepare-loopback iocontrol.0.tool-prepare =>
> iocontrol.0.tool-prepared
>
> Should I change the name in all four places?
Yes.
Viesturs
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
