I had previously tied my oil pump to the run signal on my VFD, so when the machine was running, lube pump was running.
The lube pump works with a cam raising an oiler, then letting the spring/gravity drive the pump to push the oil out. My understanding is that it's pretty common to oil way too much on these bridgeport series 1 BOSSV if you leave the pump running all the time, which has proven to be the case for mine, as my floor will attest. Is there a nice way to do a periodic timer or duty cycle in the hal? It's trivial for me to drive the pump relay with a digital output, then I can tune the pump cam motor duty cycle with 'run' to keep it running automatically, but not quite so much... Thanks in advance, John ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
