Used cnc machines are so common and fairly inexpensive, retrofitting with EMC doesn't make that much sense once you factor in the amount of time it take to do a retofit. However, if a replacement machine cost hundreds of thousands, or if you are doing 10 or 20 machines, then retrofitting can probably be a good alternative, especially with EMC vs a proprietary system.
John On Sat, May 12, 2012 at 7:15 AM, k...@gmail.com <kliegelmach...@gmail.com> wrote: > There is a bit of talk on some machine shop forums, arguments perhaps, that > retrofitting a machine is a waste of time. > And that it's time and money well spent to just buy a good used > machine and move on with making money with it. > Any comments on this from the list? > > dk > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
