I did manage to get two traces last night with a kick start from your instructions and lots of help from the IRC. At the end I figured out the two circuits I was monitoring was the same phase. I do feel that I can get a good trace now thanks to all of you guys help.
Thanks John On 5/26/2012 10:59 AM, Jon Elson wrote: > John Thornton wrote: >> Gene, >> >> The scope is a Tektronix 2232 if you can shed any light on how to >> capture two waves with it I'm all ears. >> > In the box labeled vertical, there is a mode switch, set it to "both". > To the right, set the > switch to "alt", it will alternate between the two channels. Then, turn the > position knobs until two lines are visible on the screen. Set the > individual > attenuators to appropriate values, and the coupling selectors to AC or DC > as needed. If there are no malfunctions in the scope, that should do it. > > Jon > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
