John Thornton wrote: > > The resistor/capacitor would be a low cost experiment. How do you > calculate what the values are for the resistor and the cap? Did you put > the resistor in series with one of the control lines? Does the cap > connect to the upstream side or the downstream side of the resistor? > Maybe a stick drawing would help me understand... > This machine is running LinuxCNC? Don't do it with RC, put a HAL component in there. You can use either lowpass or limit3 between motion.spindle-speed-out and whatever produces the analog command to the spindle drive.
I had to do this to slow down the reversing of the spindle when rigid tapping so the Z axis could keep up. Jon ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
