On 7/21/2012 12:38 PM, Dave Keeton wrote: > All, > I installed a Axiom ax5214h card in my control. Since doing this > the Axis GUI will not start up in my config. TKEMC runs fine. Any help > would be appreciated. > > Dave > >
Dave: You've got a lively side-bar exchange going among Andy, Eric, and me. My interpretation of your first message seems to be the most limited in that I infer everything including Axis was "working" until you added the Axiom I/O board. Andy's interpretation would mean Axis never worked. Eric's would mean LinuxCNC itself is failing to start. We need you to provide more information :-) Which version of LinuxCNC? Which version of Ubuntu? Which motherboard, cpu, graphics subsystem, etc.? Is it a straight-forward install from the LinuxCNC distribution/LiveCD or have you customized it? Under what circumstances, if any, have you ever had Axis running in this system? Does glxgears run and display spinning meshed gears? Does the output from dmesg contain any suggestive messages (no, not that kind of suggestive)? I'm sorry for the curtness of my first response. I was trying to get some online financial business done before my credit union shut down its site for maintenance this weekend (nope; they pulled the plug before I could get finished). I realize now that my appended anecdote looks pretty snarky. I should have sent it separately since I have been reminded of the experience by any number of discussion threads. Don't take it to heart. I actually assumed you were doing pretty well since you could make TkEMC to run in place of Axis. LinuxCNC can be a bear to configure with so many possible variations in hardware and interfaces. Everyone of us has had days where we're stumped. Regards, Kent ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
