On 7/21/2012 5:24 PM, Dave Keeton wrote: > ... > > Sorry if I caused such an uproar just asking a simple question! GEEEZ > Guys! Just kidding.....Yes I should have given more info as I knew > better being a service tech for CNC machines myself. Sorry, it wont > happen again! Turns out that long before I installed the Axiom card I > removed a Visiontek ATI X1300 graphics card and forgot to remove all of > the drivers and ATI Catalyst software. I installed the Axiom DIO card > yesterday. The Axis GUI worked up until that point then everything went > haywire and the only GUI that would work was tkemc. I removed the ATI > drivers and Axis started working again as well as the Axiom card. The > computer is a rack mount single board with an ISA/PCI backplane. The CPU > is a pentium 4 2.4 Ghz with 2 Gig of ram. Currently using the embedded > graphics port. > > Sorry for the trouble and please don't spankenz me with that hair brush > again! ;-) > > Dave > >
Boy, if only I had a nickel for every time I heard the old "I forgot to remove the old drivers" :-) It should be obvious that in the absence of facts we are perfectly happy to make up scenarios out of whole cloth. Glad it's working now. Like the man said, all's well that ends well. Regards, Kent ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
