2012/8/18 John Thornton <bjt...@gmail.com>: > Are you loading the user part of classicladder? > > loadusr classicladder --nogui hardinge.clp >
I have only these 2 lines in HAL: loadrt classicladder_rt addf classicladder.0.refresh servo-thread I can open Ladder editor from LinuxCNC menu. I think that I found the solution: I added my own section in "section manager" window. Now after closing LinuxCNC and opening it again and then opening my clp file in Ladder editor has all the things I had previously put in there. Unfortunately I do not see in explained in this page: http://www.linuxcnc.org/docs/html/ladder/classic_ladder_fr.html Anyway, that one is solved. I have another question: Is there a way to assign different values to s32 output pin? In my case I want that s32 output pin to have velocity command for stepgen. And I need different velocities based on status of input switches. Instead of creating 3 or even 4 s32 output per stepgen I would like to set the value in classicladder, but I do not see, how to do that. Can anyone more experienced with classicladder advice me, if that is actually possible? -- Viesturs If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
