Yes, I emailed Frank at Maritool and he sent me the torque specs for the ER collets.
ER 11 20 ft-lbs ER 16 35 ft-lbs ER 25 60 ft-lbs ER 32 90 ft-lbs John On 10/30/2012 7:33 PM, Sam wrote: > you just need to tighten them correctly. Has anyone actually looked up the > torque tightening specs on collets? I think you would be surprised.... we > have collets into the 1.5 to 2 inch range. I don't ever remember any pulling > out. > > John Thornton <bjt...@gmail.com> wrote: > >> I use collets up to 3/4" with heavy cuts and huge fly cutters with no >> problem. Collets are for milling too. >> >> John >> >> On 10/30/2012 12:35 PM, jeremy youngs wrote: >>> be wary of milling with a collet, any serious cuts will tend to pull >>> the endmill out ouf the collet. my position is i dont put an endmill >>> larger than 3/8 in a collet they are for drills and reamers. otherwise >>> a very good solution >> >> ------------------------------------------------------------------------------ >> Everyone hates slow websites. So do we. >> Make your web apps faster with AppDynamics >> Download AppDynamics Lite for free today: >> http://p.sf.net/sfu/appdyn_sfd2d_oct >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_sfd2d_oct > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users