On Fri, 23 Nov 2012, Stephen Dubovsky wrote: > Date: Fri, 23 Nov 2012 12:17:27 -0500 > From: Stephen Dubovsky <smdubov...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] PNCConf + 5i25 + 7i76 configuration failure > > Chris, the missing serial port is our doing. I turned it off trying to get > anything to work. Linuxcnc will not start w the 7i76x2 either (and turning > down the stepgens/serial/etc to get it to work on one 7i76). I dont know > what the 'USRMOT command timeout' and 'waiting for s.axes' things mean. > Maybe a linuxcnc install problem a not a pncconf one? > Thanks, > Stephen
Sometimes you need to look at the kernel log to determine why linuxCNC wont start. You can do this by typing in a terminal window: dmesg --clear linuxcnc dmesg > logfile and then reading carefully through logfile, or posting it where others can look at it > On Nov 23, 2012 2:41 AM, "Chris Morley" <chrisinnana...@hotmail.com> wrote: > >> >> >> >>> Date: Thu, 22 Nov 2012 22:48:25 -0500 >>> From: smdubov...@gmail.com >>> To: emc-users@lists.sourceforge.net >>> Subject: [Emc-users] PNCConf + 5i25 + 7i76 configuration failure >>> >>> Hello all, we get a Gerber Dimension 200 Gantry router converted today w/ >>> the help of my dad and brother. This is the first time I've used a 7i76 >>> and it seems to be generating a bad ini/hal file? We installed a clean >>> 2.5.1 and get the following error when trying to start LinuxCNC. PNCConf >>> can jog the axis back and forth in its built in test so the hardware >> seems >>> to work. I can't make sense of the errors. There are no MOT, IO, etc >>> sections in the ini file. Can anyone help? >>> >>> Thanks, >>> Stephen >> >> After another look I see you seemed to have set the number of serial ports >> to 0 - it must be set to one >> >> If you do that then 7i76x1 should work fine. >> >> Chris M >> >> >> ------------------------------------------------------------------------------ >> Monitor your physical, virtual and cloud infrastructure from a single >> web console. Get in-depth insight into apps, servers, databases, vmware, >> SAP, cloud infrastructure, etc. Download 30-day Free Trial. >> Pricing starts from $795 for 25 servers or applications! >> http://p.sf.net/sfu/zoho_dev2dev_nov >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > ------------------------------------------------------------------------------ > Monitor your physical, virtual and cloud infrastructure from a single > web console. Get in-depth insight into apps, servers, databases, vmware, > SAP, cloud infrastructure, etc. Download 30-day Free Trial. > Pricing starts from $795 for 25 servers or applications! > http://p.sf.net/sfu/zoho_dev2dev_nov > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
