Bruce Layne wrote: > If you're stuck with front surface engraving, then I'd engrave deeply > and use a lot of paint, or several layers of paint and several layers of > clear coat on top. Another trick that can work well is to use a liquid > paint instead of a rattle can of spray paint, fill the deeply engraved > letters with it rather than using several coats of spray paint, and use > a solvent to remove the excess paint from the top surface of the key > cap. I did this once to repair a button. i filled the letters all the way, and then sanded the excess paint off. it worked very well.
Jon ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
