Unless I am reading that incorrectly, that appears to be fine for a 1 ms servo thread, but would not work well for direct stepper control.
The D525MW boards are really nice. I have used a lot of them over the last year plus and I have a bit of stockpile built up right now, but the Intel 525 CPU is being phased out. The Intel D525MW board is already discontinued but they have extended production probably because the D525MW replacements have so many problems. The newer Intel D2700MUD, 2500, etc boards video chip is only Windows 7 32 bit compatible which is really silly. The Intel manager who made that decision must have been using medical marijuana at the time! Jetway has a "long term available" D525 board but it is about $200 now and there is no assurance that they will not be phased this year also. Also PCI slots are getting rarer on the MITX boards. So when you take all of the available MITX boards, and eliminate the newer Intel CPUs, and the boards without PCI slots, you end up with very few offerings. That's my take on the current Motherboard situation.. Hence my question about the newer Intel Design MITX boards. I'd like to hear other viewpoints if you have differing opinions. Thanks, Dave On 3/25/2013 6:38 AM, Anders Wallin wrote: > On Mon, Mar 25, 2013 at 2:36 AM, Dave<[email protected]> wrote: > > >> Has anyone tried running the latency test on the Intel H61, H77, or Z77 >> design motherboards using a CPU with the integrated HD graphics? >> >> > Intel DH61AG + i3 2120T 2.6 GHz LGA1155 > http://www.anderswallin.net/2012/12/latency-histogram/ > > It would be great if there was a latency-test that would automatically > upload results + hardware/software-configuration to a web-hosted database... > > Anders > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_d2d_mar > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_mar _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
