right but i dont see why automated homing would be excluded . just using the panels as the touch off instead of homing switches pretty simple no?
On Mon, Apr 15, 2013 at 2:04 PM, Viesturs Lācis <viesturs.la...@gmail.com>wrote: > 2013/4/15 jeremy youngs <jcyoung...@gmail.com> > > > on the torch head , touch off in a corner on 2 pads run 5 v to torch head > > and a debounce buffer then just touch off . should be more than sufficent > > for a plasma table , if a thc is used could just use the touch off pin > > output no?? > > > Well, if I understand Your correctly, You are suggesting manual touch-off > procedure. What I meant something that LinuxCNC would do on its own, just > like usual homing - just press the button. > > With manual touch off also jogging into limit switches would do the trick. > One could wire both limit switches in series and link to motion.probe-input > and then do probing move along each axis. Creating vcp button to do this > for each axis is simple. > > -- > Viesturs > > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > Precog is a next-generation analytics platform capable of advanced > analytics on semi-structured data. The platform includes APIs for building > apps and a phenomenal toolset for data science. Developers can use > our toolset for easy data analysis & visualization. Get a free account! > http://www2.precog.com/precogplatform/slashdotnewsletter > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- jeremy youngs ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
