Well the G code manual would be the best place but I also have a G code tutorial here:
http://www.gnipsel.com/linuxcnc/g-code/index.html John On 5/9/2013 5:42 AM, RogerN wrote: > Is there some kind of tutorial that would help me understand enough to write > my own G-Code? > > I’m wanting to make G-84 tapping cycle work. I think it would need > parameters like F and Z, and perhaps a dwell time. So my G84 would turn on > spindle CW, feed to Z depth at 95% feed F, stop spindle, dwell, spindle CCW, > feed to starting Z at 100% F, stop spindle. > > I thought it would be a fun learning exercise to learn to make my own canned > cycles. > > Thanks! > > Roger Neal > ------------------------------------------------------------------------------ > Learn Graph Databases - Download FREE O'Reilly Book > "Graph Databases" is the definitive new guide to graph databases and > their applications. This 200-page book is written by three acclaimed > leaders in the field. The early access version is available now. > Download your free book today! http://p.sf.net/sfu/neotech_d2d_may > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. This 200-page book is written by three acclaimed leaders in the field. The early access version is available now. Download your free book today! http://p.sf.net/sfu/neotech_d2d_may _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
