On 24 June 2013 15:50, Charles Steinkuehler <char...@steinkuehler.net> wrote:
> I have some folks from the 3D printer world asking me if LinuxCNC can > be used in a "gcode mode" similar to how the Arduino currently > operates these machines (a serial terminal that accepts gcode and > spits out the occasional status message). This was historically called "DNC" or "drip feed" and you might find something with those as search terms. However, as far as I know (and it isn't very far) LinuxCNC has never supported that. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users