Thanks, just don't use the metric option as the data for metric is still in inch... I have no motivation to convert the few pitch entries in the metric dictionary so if anyone does let me know.
JT On 8/13/2013 9:03 AM, Dave wrote: > Very nice John.. > > Dave Cole > > On 8/13/2013 9:32 AM, John Thornton wrote: >> I know most of you guys on the mailing list don't visit the forum so >> here is a link to a G code generator for drilling and tapping holes on a >> mill. I wrote this mainly because we don't have a tapping cycle and if I >> forgot the pre-position move then you get a really neat show as your tap >> traverses from where it is to the bottom of the hole. Anyone ever seen a >> tapped slot? >> >> This saves me time when I need to tap some holes in a part and helps >> prevent errors. >> >> http://linuxcnc.org/index.php/english/forum/31-cad-cam/26859-mill-tapping-g-code-generator >> >> JT >> >> ------------------------------------------------------------------------------ >> Get 100% visibility into Java/.NET code with AppDynamics Lite! >> It's a free troubleshooting tool designed for production. >> Get down to code-level detail for bottlenecks, with<2% overhead. >> Download for free and get started troubleshooting in minutes. >> http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> > > ------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics Lite! > It's a free troubleshooting tool designed for production. > Get down to code-level detail for bottlenecks, with <2% overhead. > Download for free and get started troubleshooting in minutes. > http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
