>>Would it be better to just drop the 50% part of the G code calculator and let the savvy look up their hole sizes in MH and just focus on the G code?
<< No! I'm not that savvy... :-) Besides that takes more time.. Dave On 8/15/2013 7:44 AM, John Thornton wrote: > According to the MH holes for tapping have a range depending on depth of > thread engagement. > For Class 1A and 2A they are: up to 1/3D, 1/3D to 2/3D, 2/3D to 1 1/2D, > 1 1/2D to 3D. The range covers about 60% to 80% thread depth. > > Would it be better to just drop the 50% part of the G code calculator > and let the savvy look up their hole sizes in MH and just focus on the G > code? > > I'm adding spot drill for Rob and now reaming seems to be something to > add... so far using this is faster than using my $$$$ CAM software for > drilling and tapping holes :) > > JT > > > On 8/14/2013 5:34 AM, Marius Liebenberg wrote: > >> JT >> What is the correct way to calculate the drill sizes please. I will do >> the metric table but I just need to know what is the right way. >> >> >> > > ------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics Lite! > It's a free troubleshooting tool designed for production. > Get down to code-level detail for bottlenecks, with<2% overhead. > Download for free and get started troubleshooting in minutes. > http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
