On 24 September 2013 19:48, propcoder <marius.alks...@gmail.com> wrote:
> It seems that changing current settings from 8 to 20 Amps does not make > sense. Am I doing something wrong here? See attached screen-shot. If the PID maxoutput is 20 then you need to set the scalemax parameter to 20 too, as things are you are only getting 80% of max current. However, that current _should_ be 30A, as that is the nvmaxcurrent. Do you by any chance have a clamp-on ammeter? It would be instructive to see what current you are actually getting. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60133471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
