On 2 October 2013 18:26, Russell Brown <russ...@lls.lls.com> wrote: > loadrt abs names= > loadrt lowpass names=
This is a stepfconf bug. I can't recall what prompts it. I thought it was fixed. (it tries to load a bunch of components with blank names, and then their pin names collide) > http://ruffle.me.uk/cnc/Mesa_Mill.ini > http://ruffle.me.uk/cnc/Mesa_Mill.hal The INI file Z axis max velocity in the INI is a lot higher than the stepgen max velocity in the HAL file. Also, the HAL file is not actually looking in the INI file for the stepgen maxaccel, so ini file settings are not having any effect. (Which version of PNCconf is this? It is making a lot of mistakes). If you look in the HAL file both stepgen accel and velocity are absolute values rather than being sucked out of the INI file. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
