> From: bodge...@gmail.com > Date: Wed, 2 Oct 2013 18:47:08 +0100 > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] Following Error with Steppers > > On 2 October 2013 18:26, Russell Brown <russ...@lls.lls.com> wrote: > > > loadrt abs names= > > loadrt lowpass names= > > This is a stepfconf bug. I can't recall what prompts it. I thought it > was fixed. (it tries to load a bunch of components with blank names, > and then their pin names collide) >
Pncconf bug -but is probably fixed. what version was this made with? > > http://ruffle.me.uk/cnc/Mesa_Mill.ini > > http://ruffle.me.uk/cnc/Mesa_Mill.hal > > The INI file Z axis max velocity in the INI is a lot higher than the > stepgen max velocity in the HAL file. > I'm sure that was hand edited. > Also, the HAL file is not actually looking in the INI file for the > stepgen maxaccel, so ini file settings are not having any effect. > (Which version of PNCconf is this? It is making a lot of mistakes). If > you look in the HAL file both stepgen accel and velocity are absolute > values rather than being sucked out of the INI file. > That is the way it was meant to be. PNCconf has no stepgen_max entries. If they are there - they are hand edited. Chris M ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
