On Sun, 6 Oct 2013 18:10:18 -0400, you wrote:
>Just keep in mind that for a lathe, Z is not likely to be the >last move of a restore. Hi Steve, as you probably know Mach has the option to choose, and to set a safe height. Unfortunately any axis chosen may not be the "right one" for that job. I have that automatic move disabled - easier and safer to MDI or jog back to a suitable position then resume with a straight move. Often I've only moved one axis anyway, most common are X on the lathe or Z on the router or mill if clearing swarf. I jog near the work again, restart spindle, then press resume. Reminds me - must be able to toggle spindle off/on during pause. Steve Blackmore -- ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
