Am 08.10.2013 um 12:41 schrieb Michael Haberler <mai...@mah.priv.at>:
> > Am 08.10.2013 um 09:07 schrieb Steve Blackmore <st...@pilotltd.net>: > >> On Mon, 7 Oct 2013 11:19:39 +0200, you wrote: >> >> >>>> >>>> Reminds me - must be able to toggle spindle off/on during pause. >>> >>> thats a good point, that would likely also suggest at-speed before reentry >>> if the spindle is turned on >>> >>> if we use the offset pose scheme this is how it could work for resume: >>> >>> honor NML spindle commands >>> if the resume offset pose is zero: >>> wait for at-speed before starting reentry move >>> else: >>> move to resume pose >>> wait for at-speed at resume pose >>> start reentry move >>> >>> sounds right? >> >> Sounds OK to me - oops - also needs same for coolant. > > folks - please think through all features which need to work during pause, > and post what you need. > > So far I have spindle, mist, flood. I'd rather do this once only, not > piecemeal. The LinuxCNC Code Forensics Dept has determined there is nothing to do (for me) - NML spindle, flood and mist commands are perfectly honored during pause. All that is left is beating the UI's into submission ;) - Michael ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60134071&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
