Are you using the PNCconf? I found it made things much easier especially for a simple setup. Also make sure you have downloaded the correct firmware for the combo. Good luck. Peace
Pete On Fri, Nov 29, 2013 at 9:10 AM, Leonardo Marsaglia < leonardomarsagli...@gmail.com> wrote: > Hello. > > I'm in the process of testing a servo configuration witht the 5i25 and > since it's the first time I use this board I have some doubts. > > The main problem or concern that I have is when I load on halcmd 1 encoder > module and 1 pwmgen. If I list the pins I can only see the encoder pins and > rest are all displayed as GPIO pins. > > Also if I do dmesg the same thing happens. > > Is this normal? am I missing something about the settings? > > Thanks as always!! > > Leonardo. > > -- > *Leonardo Marsaglia*. > > ------------------------------------------------------------------------------ > Rapidly troubleshoot problems before they affect your business. Most IT > organizations don't have a clear picture of how application performance > affects their revenue. With AppDynamics, you get 100% visibility into your > Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics > Pro! > http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users