On 10 December 2013 20:13, Kirk Wallace <kwall...@wallacecompany.com> wrote:
> I would, given a large budget, prefer 30 or 40 taper with a power draw bar. My power draw-bar cost me £40, and half of that was because I decided to anodise the parts. (My mill was 30 INT as delivered, and is now using BT30 tooling) The Tormach power drawbar system for TTS looks reasonably easy to copy. I hated the time spent to operate the MT3 spindle on the previous mill out of all proportion to the time it actually took. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users