Mark, The MachineKit build does support USB keyboards with integrated Touchpad and Trackpoint so you don't need a separate mouse or surface to use mouse navigation.
I use a Lenovo keyboard with Trackpoint. The keyboard also has a Touchpad (which I dislike) and I've 'disabled' it using a rectangular piece of 1/8" foam sheet covering the Touchpad area (the SW doesn't have a separate disable control in the GUI and the driver is somewhat ambiguous on which device is the Trackpoint and which is the Touchpad - the foam sheet is 100% reliable Tom On 1/22/2014 6:12 PM, Mark Tucker wrote: > Is it possible to switch to another Gui in machinekit? > I have tried altering the Display section in the BeBoPr-Bridge.Ini to > Gscreen but no joy.(Just loads of errors). > I Really have a dislike for the Mouse Driven Axis Gui,Mouse and metal > cutting machines don't mix,so i was hoping to Modify Gscreen and add > some keyboard stuff in later. > > > > ------------------------------------------------------------------------------ CenturyLink Cloud: The Leader in Enterprise Cloud Services. Learn Why More Businesses Are Choosing CenturyLink Cloud For Critical Workloads, Development Environments & Everything In Between. Get a Quote or Start a Free Trial Today. http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
