Chris I changed the line
setp iocontrol.0.emc-enable-in 1 To net estop-loop iocontrol.0.user-enable-out iocontrol.0.emc-enable-in And JT's example now works.As does Axis etc.? :-) :-) I am sure this will not be my only problem but thank you for now. On 07/02/14 17:49, Chris Morley wrote: > Ok. Please post your files and i will look at after work. > Chris M > > ----- Reply message ----- > From: "Mark Tucker" <m...@rmtucker.f2s.com> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre > Date: Fri, Feb 7, 2014 9:27 AM > > > Chris > > I added the emc_stat widget as requested.It put it in objects and shows > up as hal-stat > the power button is still grayed out.? > > On 07/02/14 16:40, Chris Morley wrote: >> Please add the emc_stat widget >> >> ----- Reply message ----- >> From: "Mark Tucker" <m...@rmtucker.f2s.com> >> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> >> Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre >> Date: Fri, Feb 7, 2014 8:28 AM >> >> >> Chris >> >> There is no emc_stat widget present and no mention of power on in the >> handler file. >> It seems to be purely using the power and estop widgets. >> But the estop widget is useless because we have bypassed it in the hal >> file as stated. >> >>>> Chris >>>> >>>> I don't recall any emc_stat widget in the tutorial but i may be wrong. >>>> I will load up the glade file on my developer os and check >>>> >>>> Yes i did try the Gaxis no live plot but i had lots of errors etc and >>>> thought i would write my own. >>>> Big mistake!!! >>>> 1 week later and a lot less hair,and i am just scratching the surface. >>>> >>>> On 07/02/14 15:38, Chris Morley wrote: >>>>> Do you have an emc_stat widget in the glade file? >>>>> When you say gscreen uses 90% cpu, which skin if gscreen? Gaxis no-gui >>>>> should be the least cpu hungry. Gaxis second least. >>>>> >>>>> Chris M >>>>> >>>>> ----- Reply message ----- >>>>> From: "Mark Tucker" <m...@rmtucker.f2s.com> >>>>> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> >>>>> Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre >>>>> Date: Fri, Feb 7, 2014 6:01 AM >>>>> >>>>> >>>>> Andy >>>>> >>>>> I had already changed the comment to your version but i still have the >>>>> same results. >>>>> Everything works fine with axis and Gscreen but it will not work with my >>>>> custom Gui. >>>>> At the end of the day it must be something in the Gui. >>>>> I just followed JT's tutorials and it worked fine until i try to put it >>>>> in a real setup. >>>>> >>>>> All i wish to do at the end of the day is write a simple Gui for >>>>> machinekit that shows the needed info for running a cnc,but without the >>>>> cpu usage that Gscreen etc uses. >>>>> >>>>> The simpler standard Gui examples like Mini etc do not even show the >>>>> current feedrate etc. >>>>> >>>>> I thought it might be easier to write my own but unfortunately there >>>>> seems to be a total lack of current up to date info on this >>>>> process,other than johns tutorials. >>>>> >>>>> As an example when using Gscreen/Machinekit cpu usage is about 90% when >>>>> idle??? >>>>> When using mini etc it is around 14%. >>>>> >>>>> >>>>> >>>>> On 07/02/14 13:23, andy pugh wrote: >>>>>> On 7 February 2014 11:16, Mark Tucker <m...@rmtucker.f2s.com> wrote: >>>>>> >>>>>>> I now have the following lines in my Hal file:- >>>>>>> >>>>>>> newsig test bit >>>>>>> sets test 1 >>>>>>> net test iocontrol.0.emc-enable-in >>>>>>> >>>>>>> Is this not enough to enable the power button >>>>>> It should work. >>>>>> setp iocontrol.0.emc-enable-in 1 >>>>>> would be shorter. >>>>>> >>>>> ------------------------------------------------------------------------------ >>>>> Managing the Performance of Cloud-Based Applications >>>>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>>>> Read the Whitepaper. >>>>> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >>>>> _______________________________________________ >>>>> Emc-users mailing list >>>>> Emc-users@lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>> ------------------------------------------------------------------------------ >>>>> Managing the Performance of Cloud-Based Applications >>>>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>>>> Read the Whitepaper. >>>>> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >>>>> _______________________________________________ >>>>> Emc-users mailing list >>>>> Emc-users@lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>> >>>>> >>>> ------------------------------------------------------------------------------ >>>> Managing the Performance of Cloud-Based Applications >>>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>>> Read the Whitepaper. >>>> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >>>> _______________________________________________ >>>> Emc-users mailing list >>>> Emc-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> >>> ------------------------------------------------------------------------------ >>> Managing the Performance of Cloud-Based Applications >>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>> Read the Whitepaper. >>> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >>> >> ------------------------------------------------------------------------------ >> Managing the Performance of Cloud-Based Applications >> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >> Read the Whitepaper. >> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> ------------------------------------------------------------------------------ >> Managing the Performance of Cloud-Based Applications >> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >> Read the Whitepaper. >> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users