Chris There is no emc_stat widget present and no mention of power on in the handler file. It seems to be purely using the power and estop widgets. But the estop widget is useless because we have bypassed it in the hal file as stated.
>> Chris >> >> I don't recall any emc_stat widget in the tutorial but i may be wrong. >> I will load up the glade file on my developer os and check >> >> Yes i did try the Gaxis no live plot but i had lots of errors etc and >> thought i would write my own. >> Big mistake!!! >> 1 week later and a lot less hair,and i am just scratching the surface. >> >> On 07/02/14 15:38, Chris Morley wrote: >>> Do you have an emc_stat widget in the glade file? >>> When you say gscreen uses 90% cpu, which skin if gscreen? Gaxis no-gui >>> should be the least cpu hungry. Gaxis second least. >>> >>> Chris M >>> >>> ----- Reply message ----- >>> From: "Mark Tucker" <m...@rmtucker.f2s.com> >>> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> >>> Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre >>> Date: Fri, Feb 7, 2014 6:01 AM >>> >>> >>> Andy >>> >>> I had already changed the comment to your version but i still have the >>> same results. >>> Everything works fine with axis and Gscreen but it will not work with my >>> custom Gui. >>> At the end of the day it must be something in the Gui. >>> I just followed JT's tutorials and it worked fine until i try to put it >>> in a real setup. >>> >>> All i wish to do at the end of the day is write a simple Gui for >>> machinekit that shows the needed info for running a cnc,but without the >>> cpu usage that Gscreen etc uses. >>> >>> The simpler standard Gui examples like Mini etc do not even show the >>> current feedrate etc. >>> >>> I thought it might be easier to write my own but unfortunately there >>> seems to be a total lack of current up to date info on this >>> process,other than johns tutorials. >>> >>> As an example when using Gscreen/Machinekit cpu usage is about 90% when >>> idle??? >>> When using mini etc it is around 14%. >>> >>> >>> >>> On 07/02/14 13:23, andy pugh wrote: >>>> On 7 February 2014 11:16, Mark Tucker <m...@rmtucker.f2s.com> wrote: >>>> >>>>> I now have the following lines in my Hal file:- >>>>> >>>>> newsig test bit >>>>> sets test 1 >>>>> net test iocontrol.0.emc-enable-in >>>>> >>>>> Is this not enough to enable the power button >>>> It should work. >>>> setp iocontrol.0.emc-enable-in 1 >>>> would be shorter. >>>> >>> ------------------------------------------------------------------------------ >>> Managing the Performance of Cloud-Based Applications >>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>> Read the Whitepaper. >>> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> ------------------------------------------------------------------------------ >>> Managing the Performance of Cloud-Based Applications >>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>> Read the Whitepaper. >>> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >>> >> ------------------------------------------------------------------------------ >> Managing the Performance of Cloud-Based Applications >> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >> Read the Whitepaper. >> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
