Le 2014-02-06 19:55, Dewey Garrett a écrit : > > ------------------------------------------------------------- > Several folks have reported that the pendant stops updating. > On mine, if the pendant is idle (no buttons pressed, no wheel > movement) for approximately 40 seconds, the display stops > updating. Pressing any button restores display updating so I > just leave one button unassigned and press it to wake up the > pendant. > > Running the xhc-hb04 program executed standalone as a simulator > now reports when it detects the pendant going to sleep; when > using with hal, a pin is created for the condition (xhc-hb04.sleeping) > > I think it would be good to merge to master to get some > testing with other pendants. Thanks for the new feature to handle sleeping. I have tested with my 16 buttons MPG, but the behaviour is different: it does not send "04 00 00 00 00 00" when entering sleep mode. However, I get this message sometimes when powering up the MPG.
Frederic. ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
