Steve! Here is your sample of gcode running the newest TP
Original TP http://imagebin.org/294551 (limit of the 1 segment look-ahead) New TP (which does arc-arc , Line-arc and line-line look-ahead.) http://imagebin.org/294550 Robs hard work is awesome! (and it keeps improving) sam On 04/07/2013 05:28 PM, Steve Blackmore wrote: > On Sun, 7 Apr 2013 10:21:11 -0500, you wrote: > >> On Sun, Apr 07, 2013 at 10:13:11AM +0100, Steve Blackmore wrote: >>> CV in LinuxCNC still does not work well. Have a look at this >>> >>> http://youtu.be/ph_IVXg1C9Y >> Please share your gcode and your full config directory. > Hi Chris - Here's part of the code - it's obvious early on without all > of it. I'll post the config tomorrow - machine is at work. > > BTW - Changing N190 to > > N190 G64 P0.5 > > and it runs better, but that's far too much deviation. > > This was first reported on 26th July 2011 in a post > "trying to understand EMC's operation" > Have a read of that thread for way more information. Daniel Rogge > concurs in his tests posted on 29th. > > I've re posted as this is still occurring since V2.4 ! > > N100 G0 G21 G17 G90 G40 G49 G80 > N110 G91.1 > N120 G1 Z20.000 F3600.0 > N130 T1 M06 > N140 (End Mill {6 mm}) > N150 G43H1 Z20.000 > N160 S12000 M03 > N170(Toolpath:- Profile 1) > N180() > N190 G64 > N200 G1 X0.000 Y0.000 F3600 > N210 G0 X-1.974 Y8.147 Z6.000 > N220 G1 X-1.974 Y8.147 Z-1.000 F1200.0 > N230 G2 X-1.346 Y40.813 I1274.739 J-8.173 F3600.0 > N240 G1 X-1.246 Y43.543 Z-1.000 > N250 G1 X-1.175 Y44.975 Z-1.000 > N260 G2 X0.630 Y65.631 I357.751 J-20.852 > N270 G2 X3.629 Y86.169 I356.674 J-41.593 > N280 G1 X3.738 Y86.813 Z-1.000 > N290 G1 X3.885 Y87.608 Z-1.000 > N300 G1 X4.121 Y88.649 Z-1.000 > N310 G1 X4.891 Y91.654 Z-1.000 > N320 G2 X8.045 Y101.818 I125.643 J-33.412 > N330 G2 X12.017 Y111.685 I122.371 J-43.533 > N340 G1 X12.167 Y112.021 Z-1.000 > N350 G1 X12.392 Y112.507 Z-1.000 > N360 G1 X12.836 Y113.360 Z-1.000 > N370 G1 X14.404 Y116.145 Z-1.000 > N380 G2 X48.101 Y150.602 I84.920 J-49.341 > N390 G2 X94.143 Y164.886 I51.247 J-83.839 > N400 G1 X98.585 Y165.027 Z-1.000 > N410 G2 X107.856 Y164.832 I1.550 J-146.800 > N420 G1 X114.650 Y164.312 Z-1.000 > N430 G1 X121.416 Y163.467 Z-1.000 > N440 G1 X124.191 Y163.060 Z-1.000 > N450 G1 X127.048 Y162.615 Z-1.000 > N460 G2 X139.931 Y159.885 I-25.733 J-153.243 > N470 G2 X152.544 Y156.073 I-38.655 J-150.662 > N480 G1 X157.534 Y154.334 Z-1.000 > N490 G1 X161.108 Y153.062 Z-1.000 > N500 G2 X183.667 Y143.969 I-122.738 J-337.027 > N510 G2 X205.551 Y133.371 I-145.209 J-327.734 > N520 G1 X207.732 Y132.276 Z-1.000 > N530 G1 X215.815 Y128.556 Z-1.000 > N540 G1 X219.037 Y127.150 Z-1.000 > N550 G1 X222.272 Y125.782 Z-1.000 > N560 G1 X223.416 Y125.300 Z-1.000 > N570 G1 X223.904 Y125.085 Z-1.000 > N580 G3 X237.774 Y120.073 I38.168 J83.912 > N590 G3 X252.272 Y117.334 I24.318 J88.999 > N600 G1 X253.479 Y117.248 Z-1.000 > > Steve Blackmore > -- > > ------------------------------------------------------------------------------ > Minimize network downtime and maximize team effectiveness. > Reduce network management and security costs.Learn how to hire > the most talented Cisco Certified professionals. Visit the > Employer Resources Portal > http://www.cisco.com/web/learning/employer_resources/index.html > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users