Oh well...... no joy. ;-) Its pretty hard to argue with all of the graphs you made.
>>Mach4 will fix all these problems. That was the mantra for a while, but I think that reality has slowly sunk in. I hope that all of the Mach4 work they have put in, pays off eventually. It has taken a long, long time and it still is not released the last I looked. >>I doubt Steve will switch - jog while pause seems to be a real show stopper for him. I thought that Steve was using the jog while pause tweak that Les wrote up a while ago. There is also Micheal's solution which I have not tried. I see that the USBCNC controller he is using does do jog while paused. Dave On 3/4/2014 1:27 PM, sam sokolik wrote: > nah - I got radio silence with the last couple posts.. Mach4 will fix > all these problems. > > I doubt Steve will switch - jog while pause seems to be a real show > stopper for him. > > sam > > On 3/4/2014 12:22 PM, Dave Cole wrote: >> Cool Sam/Rob, >> >> So do I sense that a new message thread is about to be created on the >> Mach3 email list.. ;-) >> >> Steve, I think you may need to swap out the control on your router if >> you want to get in on this! >> >> You have waited a long time for this! >> >> Dave >> >> On 3/3/2014 3:20 PM, sam sokolik wrote: >>> One thing I have noticed - with the new TP - the path reaches commanded >>> speed. mach gets close but is usually a few percent under. >>> >>> Take this program steve posted a while back. ( >>> http://electronicsam.com/images/KandT/testing/steve.ngc ) >>> >>> New TP >>> http://imagebin.org/296859 >>> If you calculate it out - it is about 3600mm/min. that is the commanded >>> velocity (following path within .1mm aprox .004") it actually >>> finishes a whole .5 seconds faster ;) >>> >>> With Mach >>> http://imagebin.org/296858 >>> it peaks at about 3300mm/min. >>> >>> sam (having too much fun...) >>> >>> >>> >>> On 2/20/2014 10:37 AM, sam sokolik wrote: >>>> Steve! >>>> >>>> Here is your sample of gcode running the newest TP >>>> >>>> Original TP >>>> http://imagebin.org/294551 (limit of the 1 segment look-ahead) >>>> >>>> New TP (which does arc-arc , Line-arc and line-line look-ahead.) >>>> http://imagebin.org/294550 >>>> >>>> Robs hard work is awesome! (and it keeps improving) >>>> >>>> sam >>>> >>>> >>>> On 04/07/2013 05:28 PM, Steve Blackmore wrote: >>>>> On Sun, 7 Apr 2013 10:21:11 -0500, you wrote: >>>>> >>>>>> On Sun, Apr 07, 2013 at 10:13:11AM +0100, Steve Blackmore wrote: >>>>>>> CV in LinuxCNC still does not work well. Have a look at this >>>>>>> >>>>>>> http://youtu.be/ph_IVXg1C9Y >>>>>> Please share your gcode and your full config directory. >>>>> Hi Chris - Here's part of the code - it's obvious early on without all >>>>> of it. I'll post the config tomorrow - machine is at work. >>>>> >>>>> BTW - Changing N190 to >>>>> >>>>> N190 G64 P0.5 >>>>> >>>>> and it runs better, but that's far too much deviation. >>>>> >>>>> This was first reported on 26th July 2011 in a post >>>>> "trying to understand EMC's operation" >>>>> Have a read of that thread for way more information. Daniel Rogge >>>>> concurs in his tests posted on 29th. >>>>> >>>>> I've re posted as this is still occurring since V2.4 ! >>>>> >>>>> N100 G0 G21 G17 G90 G40 G49 G80 >>>>> N110 G91.1 >>>>> N120 G1 Z20.000 F3600.0 >>>>> N130 T1 M06 >>>>> N140 (End Mill {6 mm}) >>>>> N150 G43H1 Z20.000 >>>>> N160 S12000 M03 >>>>> N170(Toolpath:- Profile 1) >>>>> N180() >>>>> N190 G64 >>>>> N200 G1 X0.000 Y0.000 F3600 >>>>> N210 G0 X-1.974 Y8.147 Z6.000 >>>>> N220 G1 X-1.974 Y8.147 Z-1.000 F1200.0 >>>>> N230 G2 X-1.346 Y40.813 I1274.739 J-8.173 F3600.0 >>>>> N240 G1 X-1.246 Y43.543 Z-1.000 >>>>> N250 G1 X-1.175 Y44.975 Z-1.000 >>>>> N260 G2 X0.630 Y65.631 I357.751 J-20.852 >>>>> N270 G2 X3.629 Y86.169 I356.674 J-41.593 >>>>> N280 G1 X3.738 Y86.813 Z-1.000 >>>>> N290 G1 X3.885 Y87.608 Z-1.000 >>>>> N300 G1 X4.121 Y88.649 Z-1.000 >>>>> N310 G1 X4.891 Y91.654 Z-1.000 >>>>> N320 G2 X8.045 Y101.818 I125.643 J-33.412 >>>>> N330 G2 X12.017 Y111.685 I122.371 J-43.533 >>>>> N340 G1 X12.167 Y112.021 Z-1.000 >>>>> N350 G1 X12.392 Y112.507 Z-1.000 >>>>> N360 G1 X12.836 Y113.360 Z-1.000 >>>>> N370 G1 X14.404 Y116.145 Z-1.000 >>>>> N380 G2 X48.101 Y150.602 I84.920 J-49.341 >>>>> N390 G2 X94.143 Y164.886 I51.247 J-83.839 >>>>> N400 G1 X98.585 Y165.027 Z-1.000 >>>>> N410 G2 X107.856 Y164.832 I1.550 J-146.800 >>>>> N420 G1 X114.650 Y164.312 Z-1.000 >>>>> N430 G1 X121.416 Y163.467 Z-1.000 >>>>> N440 G1 X124.191 Y163.060 Z-1.000 >>>>> N450 G1 X127.048 Y162.615 Z-1.000 >>>>> N460 G2 X139.931 Y159.885 I-25.733 J-153.243 >>>>> N470 G2 X152.544 Y156.073 I-38.655 J-150.662 >>>>> N480 G1 X157.534 Y154.334 Z-1.000 >>>>> N490 G1 X161.108 Y153.062 Z-1.000 >>>>> N500 G2 X183.667 Y143.969 I-122.738 J-337.027 >>>>> N510 G2 X205.551 Y133.371 I-145.209 J-327.734 >>>>> N520 G1 X207.732 Y132.276 Z-1.000 >>>>> N530 G1 X215.815 Y128.556 Z-1.000 >>>>> N540 G1 X219.037 Y127.150 Z-1.000 >>>>> N550 G1 X222.272 Y125.782 Z-1.000 >>>>> N560 G1 X223.416 Y125.300 Z-1.000 >>>>> N570 G1 X223.904 Y125.085 Z-1.000 >>>>> N580 G3 X237.774 Y120.073 I38.168 J83.912 >>>>> N590 G3 X252.272 Y117.334 I24.318 J88.999 >>>>> N600 G1 X253.479 Y117.248 Z-1.000 >>>>> >>>>> Steve Blackmore >>>>> -- >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> Minimize network downtime and maximize team effectiveness. >>>>> Reduce network management and security costs.Learn how to hire >>>>> the most talented Cisco Certified professionals. Visit the >>>>> Employer Resources Portal >>>>> http://www.cisco.com/web/learning/employer_resources/index.html >>>>> _______________________________________________ >>>>> Emc-users mailing list >>>>> Emc-users@lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>> >>>> ------------------------------------------------------------------------------ >>>> Managing the Performance of Cloud-Based Applications >>>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>>> Read the Whitepaper. >>>> http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk >>>> _______________________________________________ >>>> Emc-users mailing list >>>> Emc-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> >>>> >>> ------------------------------------------------------------------------------ >>> Subversion Kills Productivity. Get off Subversion & Make the Move to >>> Perforce. >>> With Perforce, you get hassle-free workflows. Merge that actually works. >>> Faster operations. Version large binaries. Built-in WAN optimization and >>> the >>> freedom to use Git, Perforce or both. Make the move to Perforce. >>> http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >> ------------------------------------------------------------------------------ >> Subversion Kills Productivity. Get off Subversion & Make the Move to >> Perforce. >> With Perforce, you get hassle-free workflows. Merge that actually works. >> Faster operations. Version large binaries. Built-in WAN optimization and the >> freedom to use Git, Perforce or both. Make the move to Perforce. >> http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> > > ------------------------------------------------------------------------------ > Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. > With Perforce, you get hassle-free workflows. Merge that actually works. > Faster operations. Version large binaries. Built-in WAN optimization and the > freedom to use Git, Perforce or both. Make the move to Perforce. > http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. With Perforce, you get hassle-free workflows. Merge that actually works. Faster operations. Version large binaries. Built-in WAN optimization and the freedom to use Git, Perforce or both. Make the move to Perforce. http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
