I can send one but will be tomorrow.I have one that cuts the outside of a 6in gear it has many transitions between G2-G3 so should be a good test.
Terry On Mar 3, 2014 8:34 PM, "Robert Ellenberg" <rwe...@gmail.com> wrote: > Terry, that's a good idea. I suspect G41/G42 won't affect much since the > offsets are applied before the path is sent to the motion module, but it > would be nice to be sure. Do you have a program handy that use G41/42 > extensively? If so, I'd be happy to add it to the tests I run. > > -Rob > > > > On Mon, Mar 3, 2014 at 7:54 PM, TERRY Christophersen <tcninj...@gmail.com > >wrote: > > > Have you tried the new tp with g41/g42? Im sure it wont matter but just > in > > case... > > > > Terry > > One thing I have noticed - with the new TP - the path reaches commanded > > speed. mach gets close but is usually a few percent under. > > > > Take this program steve posted a while back. ( > > http://electronicsam.com/images/KandT/testing/steve.ngc ) > > > > New TP > > http://imagebin.org/296859 > > If you calculate it out - it is about 3600mm/min. that is the commanded > > velocity (following path within .1mm aprox .004") it actually > > finishes a whole .5 seconds faster ;) > > > > With Mach > > http://imagebin.org/296858 > > it peaks at about 3300mm/min. > > > > sam (having too much fun...) > > > > > > > > On 2/20/2014 10:37 AM, sam sokolik wrote: > > > Steve! > > > > > > Here is your sample of gcode running the newest TP > > > > > > Original TP > > > http://imagebin.org/294551 (limit of the 1 segment look-ahead) > > > > > > New TP (which does arc-arc , Line-arc and line-line look-ahead.) > > > http://imagebin.org/294550 > > > > > > Robs hard work is awesome! (and it keeps improving) > > > > > > sam > > > > > > > > > On 04/07/2013 05:28 PM, Steve Blackmore wrote: > > >> On Sun, 7 Apr 2013 10:21:11 -0500, you wrote: > > >> > > >>> On Sun, Apr 07, 2013 at 10:13:11AM +0100, Steve Blackmore wrote: > > >>>> CV in LinuxCNC still does not work well. Have a look at this > > >>>> > > >>>> http://youtu.be/ph_IVXg1C9Y > > >>> Please share your gcode and your full config directory. > > >> Hi Chris - Here's part of the code - it's obvious early on without all > > >> of it. I'll post the config tomorrow - machine is at work. > > >> > > >> BTW - Changing N190 to > > >> > > >> N190 G64 P0.5 > > >> > > >> and it runs better, but that's far too much deviation. > > >> > > >> This was first reported on 26th July 2011 in a post > > >> "trying to understand EMC's operation" > > >> Have a read of that thread for way more information. Daniel Rogge > > >> concurs in his tests posted on 29th. > > >> > > >> I've re posted as this is still occurring since V2.4 ! > > >> > > >> N100 G0 G21 G17 G90 G40 G49 G80 > > >> N110 G91.1 > > >> N120 G1 Z20.000 F3600.0 > > >> N130 T1 M06 > > >> N140 (End Mill {6 mm}) > > >> N150 G43H1 Z20.000 > > >> N160 S12000 M03 > > >> N170(Toolpath:- Profile 1) > > >> N180() > > >> N190 G64 > > >> N200 G1 X0.000 Y0.000 F3600 > > >> N210 G0 X-1.974 Y8.147 Z6.000 > > >> N220 G1 X-1.974 Y8.147 Z-1.000 F1200.0 > > >> N230 G2 X-1.346 Y40.813 I1274.739 J-8.173 F3600.0 > > >> N240 G1 X-1.246 Y43.543 Z-1.000 > > >> N250 G1 X-1.175 Y44.975 Z-1.000 > > >> N260 G2 X0.630 Y65.631 I357.751 J-20.852 > > >> N270 G2 X3.629 Y86.169 I356.674 J-41.593 > > >> N280 G1 X3.738 Y86.813 Z-1.000 > > >> N290 G1 X3.885 Y87.608 Z-1.000 > > >> N300 G1 X4.121 Y88.649 Z-1.000 > > >> N310 G1 X4.891 Y91.654 Z-1.000 > > >> N320 G2 X8.045 Y101.818 I125.643 J-33.412 > > >> N330 G2 X12.017 Y111.685 I122.371 J-43.533 > > >> N340 G1 X12.167 Y112.021 Z-1.000 > > >> N350 G1 X12.392 Y112.507 Z-1.000 > > >> N360 G1 X12.836 Y113.360 Z-1.000 > > >> N370 G1 X14.404 Y116.145 Z-1.000 > > >> N380 G2 X48.101 Y150.602 I84.920 J-49.341 > > >> N390 G2 X94.143 Y164.886 I51.247 J-83.839 > > >> N400 G1 X98.585 Y165.027 Z-1.000 > > >> N410 G2 X107.856 Y164.832 I1.550 J-146.800 > > >> N420 G1 X114.650 Y164.312 Z-1.000 > > >> N430 G1 X121.416 Y163.467 Z-1.000 > > >> N440 G1 X124.191 Y163.060 Z-1.000 > > >> N450 G1 X127.048 Y162.615 Z-1.000 > > >> N460 G2 X139.931 Y159.885 I-25.733 J-153.243 > > >> N470 G2 X152.544 Y156.073 I-38.655 J-150.662 > > >> N480 G1 X157.534 Y154.334 Z-1.000 > > >> N490 G1 X161.108 Y153.062 Z-1.000 > > >> N500 G2 X183.667 Y143.969 I-122.738 J-337.027 > > >> N510 G2 X205.551 Y133.371 I-145.209 J-327.734 > > >> N520 G1 X207.732 Y132.276 Z-1.000 > > >> N530 G1 X215.815 Y128.556 Z-1.000 > > >> N540 G1 X219.037 Y127.150 Z-1.000 > > >> N550 G1 X222.272 Y125.782 Z-1.000 > > >> N560 G1 X223.416 Y125.300 Z-1.000 > > >> N570 G1 X223.904 Y125.085 Z-1.000 > > >> N580 G3 X237.774 Y120.073 I38.168 J83.912 > > >> N590 G3 X252.272 Y117.334 I24.318 J88.999 > > >> N600 G1 X253.479 Y117.248 Z-1.000 > > >> > > >> Steve Blackmore > > >> -- > > >> > > >> > > > > > ------------------------------------------------------------------------------ > > >> Minimize network downtime and maximize team effectiveness. > > >> Reduce network management and security costs.Learn how to hire > > >> the most talented Cisco Certified professionals. Visit the > > >> Employer Resources Portal > > >> http://www.cisco.com/web/learning/employer_resources/index.html > > >> _______________________________________________ > > >> Emc-users mailing list > > >> Emc-users@lists.sourceforge.net > > >> https://lists.sourceforge.net/lists/listinfo/emc-users > > >> > > > > > > > > > > > ------------------------------------------------------------------------------ > > > Managing the Performance of Cloud-Based Applications > > > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > > > Read the Whitepaper. > > > > > > > > http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > Subversion Kills Productivity. Get off Subversion & Make the Move to > > Perforce. > > With Perforce, you get hassle-free workflows. Merge that actually works. > > Faster operations. Version large binaries. Built-in WAN optimization and > > the > > freedom to use Git, Perforce or both. Make the move to Perforce. > > > > > http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > ------------------------------------------------------------------------------ > > Subversion Kills Productivity. Get off Subversion & Make the Move to > > Perforce. > > With Perforce, you get hassle-free workflows. Merge that actually works. > > Faster operations. Version large binaries. Built-in WAN optimization and > > the > > freedom to use Git, Perforce or both. Make the move to Perforce. > > > > > http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ------------------------------------------------------------------------------ > Subversion Kills Productivity. Get off Subversion & Make the Move to > Perforce. > With Perforce, you get hassle-free workflows. Merge that actually works. > Faster operations. Version large binaries. Built-in WAN optimization and > the > freedom to use Git, Perforce or both. Make the move to Perforce. > > http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. With Perforce, you get hassle-free workflows. Merge that actually works. Faster operations. Version large binaries. Built-in WAN optimization and the freedom to use Git, Perforce or both. Make the move to Perforce. http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
