> I M does not shows any working sample Here's how I did it for my little Sherline mill...
Modify the Sherline control box to accept the wiring. This is an example for the tool length probe line, but the same thing happened for the home switch input: http://softsolder.com/2010/04/11/sherline-tool-length-probe-adding-a-jack/ Connect the physical home switches to the parallel port pin and define the HAL "wiring" that connects the input pin to the homing signals: http://softsolder.com/2010/05/11/sherline-cnc-mill-adding-home-switches/ Define the homing parameters that control the motion on all three axes: http://softsolder.com/2010/05/12/sherline-cnc-mill-defining-home-switches/ That configuration worked back in the 2.4 days and has continued to work fine ever since, so it should get you reasonably close to your goal. Hope that helps ... -- Ed softsolder.com ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
