Yes-- yes it work Now when 0 V DC -- adaptive -feed around 0.025 5 V DC -- adaptive -feed about 1.49 around/about because they are constantly fluctuating ///////////////// after i home machine--than introduce m52 i can not move machine. after input m52 p0 - i can again move machine
there is something else ///////////////////////////// When actually adaptive-feed will change feed of machine will it also move scroll bar that controls feed? thank you aram On Thu, Jul 24, 2014 at 12:08 PM, Philipp Burch <p...@hb9etc.ch> wrote: > Hey Aram! > > On 24.07.2014 20:58, a k wrote: > > this is pin --- hm2_5i20.0.encoder.03.velocity > > > > this is also pin ----- scale.0.in > > is it possible to connect pin to pin? > > manual say -- connecting signal to pin > > > > In fact, you can only connect pins to pins, signals/nets are just > aliases to make the whole stuff more readable. You have to use the 'net' > command to make these connections, though. The name of the net doesn't > matter as long as it follows the rules and it is not already connected > to an output. So if > > hm2_5i20.0.encoder.03.velocity > > actually exists and is an output and > > scale.0.in > > actually exists and is an input, then this line > > net vel-encoder hm2_5i20.0.encoder.03.velocity => scale.0.in > > must work and will create a net name 'vel-encoder' which connects the > two noted pins. Do you remember me telling you to dump a list of all > known pins into a file and posting it on pastebin? You can do the same > now (without actually posting it, of course) to lookup how the pins are > actually named. Or you can just open the halmeter (type 'halmeter' in a > terminal while LinuxCNC is running) and browse through the list of pins > and/or signals. This way, you can also check if the pin value changes > when you move the slider on your pot. > > Cheers, > Philipp > > > > > On Thu, Jul 24, 2014 at 11:41 AM, a k <pccncmach...@gmail.com> wrote: > > > >> i did try > >> net hm2_5i20.0.encoder.03.velocity => scale.0.in > >> and > >> net hm2_[HOSTMOT2](BOARD).0.encoder.03.velocity => scale.0.in > >> none work > >> signal and pin can not be same > >> i remove ---velocity --- and emc2 open but adaptive-feed still as a > number > >> - no connection to potentiometer > >> > >> > >> On Wed, Jul 23, 2014 at 4:04 PM, andy pugh <bodge...@gmail.com> wrote: > >> > >>> On 23 July 2014 23:55, Stuart Stevenson <stus...@gmail.com> wrote: > >>>> Then your links are not correct. > >>> > >>> scale.0.in isn't connected to encoder.03.velocity > >>> > >>> -- > >>> atp > >>> If you can't fix it, you don't own it. > >>> http://www.ifixit.com/Manifesto > >>> > >>> > >>> > ------------------------------------------------------------------------------ > >>> Want fast and easy access to all the code in your enterprise? Index and > >>> search up to 200,000 lines of code with a free copy of Black Duck > >>> Code Sight - the same software that powers the world's largest code > >>> search on Ohloh, the Black Duck Open Hub! Try it now. > >>> http://p.sf.net/sfu/bds > >>> _______________________________________________ > >>> Emc-users mailing list > >>> Emc-users@lists.sourceforge.net > >>> https://lists.sourceforge.net/lists/listinfo/emc-users > >>> > >> > >> > > > ------------------------------------------------------------------------------ > > Want fast and easy access to all the code in your enterprise? Index and > > search up to 200,000 lines of code with a free copy of Black Duck > > Code Sight - the same software that powers the world's largest code > > search on Ohloh, the Black Duck Open Hub! Try it now. > > http://p.sf.net/sfu/bds > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > ------------------------------------------------------------------------------ > Want fast and easy access to all the code in your enterprise? Index and > search up to 200,000 lines of code with a free copy of Black Duck > Code Sight - the same software that powers the world's largest code > search on Ohloh, the Black Duck Open Hub! Try it now. > http://p.sf.net/sfu/bds > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
