this is pin --- hm2_5i20.0.encoder.03.velocity this is also pin ----- scale.0.in is it possible to connect pin to pin? manual say -- connecting signal to pin
On Thu, Jul 24, 2014 at 11:41 AM, a k <pccncmach...@gmail.com> wrote: > i did try > net hm2_5i20.0.encoder.03.velocity => scale.0.in > and > net hm2_[HOSTMOT2](BOARD).0.encoder.03.velocity => scale.0.in > none work > signal and pin can not be same > i remove ---velocity --- and emc2 open but adaptive-feed still as a number > - no connection to potentiometer > > > On Wed, Jul 23, 2014 at 4:04 PM, andy pugh <bodge...@gmail.com> wrote: > >> On 23 July 2014 23:55, Stuart Stevenson <stus...@gmail.com> wrote: >> > Then your links are not correct. >> >> scale.0.in isn't connected to encoder.03.velocity >> >> -- >> atp >> If you can't fix it, you don't own it. >> http://www.ifixit.com/Manifesto >> >> >> ------------------------------------------------------------------------------ >> Want fast and easy access to all the code in your enterprise? Index and >> search up to 200,000 lines of code with a free copy of Black Duck >> Code Sight - the same software that powers the world's largest code >> search on Ohloh, the Black Duck Open Hub! Try it now. >> http://p.sf.net/sfu/bds >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
