What do you want for the M561? Dave
On 7/30/2014 4:32 PM, dave wrote: > On Wed, 2014-07-30 at 14:11 -0500, Jack Coats wrote: >> For a demo, getting a machine to just do it (even if it takes 'breaks' due >> to excess temperatures) for a while, would be fantastic. Just might need >> 'yet another sensor'. >> >> Especially for demo, being able to run continuously is great but not >> essential. For proof of concept (or ability with 'limited' (no 3-phase) >> power) is a great goal. Document it and call it a feature! :-) >> >> For those that MUST use 3-phase, I have used for computer operations >> "motor-generator sets", basically a single phase motor driving a 3-phase >> generator. A pretty high energy loss, but in my case, it allowed >> generating 400Hz power for a mainframe. >> >> I talked with a commercial CNC guy in my area, listening in the background >> to his motor-generator set that he used for machine power. He hated the >> excess noise and power loss, but commercial 3 phase was not available where >> he was. But it did work well enough for him to be in business using it! >> So it can be done. > Jack, > I've considered using a 28 V, 100 A Leece-Neville alternator for welding > (TIG). It is gathering dust on my M561. Unless someone wants to buy the > 561. ;-) > Of course, one needs to cobble up a good regulator for it. ;-) > > Dave > > >> ------------------------------------------------------------------------------ >> Infragistics Professional >> Build stunning WinForms apps today! >> Reboot your WinForms applications with our WinForms controls. >> Build a bridge from your legacy apps to the future. >> http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Infragistics Professional > Build stunning WinForms apps today! > Reboot your WinForms applications with our WinForms controls. > Build a bridge from your legacy apps to the future. > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
