Hi all; I thought I had this fixed.
running a 4 hour engraving process, and the X axis slowly moves. At the end, it is off, maybe, 0.3mm or so. (using centre drill before and after, you can see different points) I thought I had this fixed, because I've had this problem for a long time, now I find that the error is small, but still exists. - 5i25 has stepdir, etc, parameters set to 2,000 (all 4 of them) - The G540 motor is tuned as per directions. (tuned more than once) - Only X axis affected, and only in 1 direction. - machine slowed down, currently trying one where I increased accel parameters to slow down any "jerking". I'm beginning to think that the G540 is not working quite right, as I've spent (probably, over the last year) about 1 week on fixing this X axis slip. What would you guys try? ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
