I've had a problem proposed to me. Any ideas or suggestions? A series of randomly sized wooden pieces (uniform thickness) placed randomly on a slow conveyor. Each piece has 1 to 4 small pockets milled in them. I would like to automate a method of blowing out the dust left from milling the pockets. How hard would it be to detect the location of these pockets, position an air nozzle over the pocket and clean them with a short air blast as they are carried down the conveyor.
-- ======================================== Todd Zuercher mailto:[email protected] ======================================== ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
