I would expect so - you'll use (for instance) hm2_5i25.0.7i76.0.0 for one machine, and the next 7i76 for the next machine.
Not that I'm an expert, but it's what I'd do for this instance. (I have a lathe on the parallel port, and a 5i25/7i76 combo for a mill - at least, I'm trying to do this...) On Sun, Aug 24, 2014 at 11:32 AM, Axel Zöllich <fa...@zoellich.de> wrote: > I'am using linuxcnc with the parallelport setup to control an 4 axis > stepper > mill since two years. This setup is working satisfying. > > Now I'd like to switch to (probably) the mesa 5i25 7i76 combo to achive a > higher step frequency, get more I/O lines and for the watchdog. > > As I've got a lathe awaking to be controlled by linuxcnc I'me thinking > about > using a second 7i76 for the lathe connected to the same 5i25 but operated > by > another linuxcnc instance. Is this possible? > > > Axel > > > -- > Wir verwenden ausschließlich blaue Elektronen aus biologischem Anbau. > > > ------------------------------------------------------------------------------ > Slashdot TV. > Video for Nerds. Stuff that matters. > http://tv.slashdot.org/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
