glad you managed it all in the end
On 24 August 2014 21:05, John Alexander Stewart <ivatt...@gmail.com> wrote: > Ok - success! > > 1) Did David's suggestion re wiring. > 2) Marius would have been able to help - I increased some of the timings > for step and dir, > 3) I did up the amperage to the axes; don't know if that made a difference. > > Lo and behold - the Y and Z axes are working. :-) The X axis needs some > physical work for ball screw nut clearance, so it's not wired in yet. > > Whew. It's nice to get the machine moving. > > More work tuning, and adding all the switches and spindle control/feedback, > but it looks like another LinuxCNC machine is in liftoff. > > Thanks for the pats on the back and directions - JohnS. > > ------------------------------------------------------------------------------ > Slashdot TV. > Video for Nerds. Stuff that matters. > http://tv.slashdot.org/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users