the only difference is in the wireless , other than that they are identical iv'e had mine for about 6 weeks ( hb04 ) and it works fine . given one niggle , the update of the lcd can at times , be slightly delayed but give it half a sec to settle and it's fine .
iv'e not had any problems , the wireless range is limited , so what i did was to place the dongle in a plastic box to the side of the machine nearest the operator , and ran a usb extention to the pc , the MDI has a indent click which is annoying at times , i might open it and see if it can be removed , but i am really just picking at straws overall i'm satisfied with the unit i'm just about to obtain another , so their not that bad ! Dave On 13 September 2014 15:32, Pete Matos <petefro...@gmail.com> wrote: > This Pendant looks very promising and I am pleased to find that the > LinuxCNC Gods have smiled upon it and tried to integrate it. I am wondering > how you guys find the quality of this unit. I am also wondering about the > wireless nature of the unit. Do you find it works pretty well immediately > etc? I see they also offer an LHB04 model that comes with a longish USB > cable that looks more like what I am interested in. I would love to have > quick axis selection and step setting in a portable device I can set on the > machines table while I do the setup. My machine currently has an MPG from > the original control and I use the I button and Shift I to move between the > step settings which kinda takes some careful dexterity as well as requiring > me to move my attention to the pendant on my Cincinatti Arrow 500 and away > from the workpiece/table. Here is a link to an ebay ad for the wired model > I am more interested in. Peace > > > http://www.ebay.com/itm/Handwheel-USB-MPG-Pendant-LHB04-for-CNC-Mac-Mach-3-4-Axis-Engraving-l-/300949684991 > > Pete > > > On Sat, Sep 13, 2014 at 9:47 AM, David Armstrong <cncbas...@gmail.com> > wrote: > > > the only reference i can find to stepsize is in the ini > > step = xhc-hb04.stepsize-up > > > > i cannot find a reference to stepsize in either of the tcl files either > , i > > dont think it's going to be as easy as changing to stepsize-down > > so we shall await Dewey's thoughts > > > > > > > > > > On 13 September 2014 14:23, Marius Alksnys <marius.alks...@gmail.com> > > wrote: > > > > > XHC HB04 pendant has hal pin step-up, while it is more convienient way > > > to approach some position by stepping increment down. > > > > > > How to change this? > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > Want excitement? > > > Manually upgrade your production database. > > > When you want reliability, choose Perforce > > > Perforce version control. Predictably reliable. > > > > > > > > > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > ------------------------------------------------------------------------------ > > Want excitement? > > Manually upgrade your production database. > > When you want reliability, choose Perforce > > Perforce version control. Predictably reliable. > > > > > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ------------------------------------------------------------------------------ > Want excitement? > Manually upgrade your production database. > When you want reliability, choose Perforce > Perforce version control. Predictably reliable. > > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users