Amazon has some 1000 V rated 100:1 probes that have very good feedback ratings for not much money.
Dave On 9/18/2014 4:05 AM, Erik Christiansen wrote: > On 17.09.14 23:50, andy pugh wrote: >> On 17 September 2014 23:20, David Bagby <d...@calypsoventures.com> wrote: >>> Along those lines, folks may find this interesting: >>> https://www.lab-nation.com/ >>> >>> 2 channel 100 MHz scope, 8 channel logic analyzer, wave for generator, >>> pick your favorite screen flavor. >>> OSx, Linux, Windwos, Android or iOS. >> Along the same lines: http://redpitaya.com > The similar sort of unit I bought a couple of years ago, an earlier > model of the 2 channel one here: > > http://bitscope.com/product/ > > began life as an open-source design. It's also 100 Ms/s, etc., but the > price then was more than the newer gadgets seem to be now. At the time, > it was the only one I could find which would run under linux. The sturdy > AL extruded case is nice. > > It's a good idea to buy at least one HV rated x10 probe together with > one of these small units. The inputs on mine are only rated to 63v, so a > good x10 probe is needed before poking around in 240v mains stuff. > > Erik > --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
