On 26 September 2014 04:28, Peter C. Wallace <p...@mesanet.com> wrote:
> The 7I76 spindle analog out circuitry expects a regulated 5V to 12V supply, > your supply has about 10K Ohms of series resistance so is not a suitable > voltage source. You can use an isolated external supply of 5 to 12V It might be important to stress "isolated" there. The KBIC controller float the pot at +100 volts or so. One solution is probably a small 12V - 12V isolated DC-DC converter connected to the normal 12V DC. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users