in production it could have been done with a gang setup on a horizontal with a travel limit.
a slitting saw for the undercut and the right diameter for the rest and an indexing device Dave On 13/10/2014, Pete Matos <[email protected]> wrote: > Not sure what I am missing but it looks like just a simple part with some > vertical ramps on the face. Probably could cut it vertically in a round > fixture or rotab vertically with a ball endmill and 3d mill the ramps and > cut the rest with flat endmill. If there is a slight taper to the lug faces > it is hard to tell from the photos. > > Pete > > > On Mon, Oct 13, 2014 at 10:01 AM, andy pugh <[email protected]> wrote: > >> On 13 October 2014 14:52, Dave Caroline <[email protected]> >> wrote: >> > I dont think it is that tapered I think a plain endmill will be close >> enough >> > specially considering its age and available tools at the time >> >> It looks like there is a slight undercut on the dog face to keep it in >> mesh under load, and that can't be done with a plain end-mill. (I >> don't think) >> >> I could always file it, of course. >> >> >> >> -- >> atp >> If you can't fix it, you don't own it. >> http://www.ifixit.com/Manifesto >> >> >> ------------------------------------------------------------------------------ >> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer >> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports >> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper >> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer >> http://p.sf.net/sfu/Zoho >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > > > -- > Pete Matos > A and N Precision and Fabrication > Maryville, Tennessee > 865-236-8996 > ------------------------------------------------------------------------------ > Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer > Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports > Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper > Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer > http://p.sf.net/sfu/Zoho > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
