Dont overthink it;) 1) Mount it flat and cut four slots. It appears thats what they did. To make them undercut as your last email states, incline on a rotary table slightly (or tilt the head.) 2) Mount on an A-axis and machine the ramps from the side.
You will have a very small step at the bottom of the ramps from the intersecting tool paths that wont affect function. SMD On Mon, Oct 13, 2014 at 10:01 AM, andy pugh <bodge...@gmail.com> wrote: > On 13 October 2014 14:52, Dave Caroline <dave.thearchiv...@gmail.com> > wrote: > > I dont think it is that tapered I think a plain endmill will be close > enough > > specially considering its age and available tools at the time > > It looks like there is a slight undercut on the dog face to keep it in > mesh under load, and that can't be done with a plain end-mill. (I > don't think) > > I could always file it, of course. > > > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer > Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports > Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper > Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer > http://p.sf.net/sfu/Zoho > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
