Can you send us the output of 'dpkg -s linux-image-3.4-9-rtai-686-pae' and paste the output of dmesg somewhere?
# dpkg -s linux-image-3.4-9-rtai-686-pae Package: linux-image-3.4-9-rtai-686-pae Status: install ok installed Priority: optional Section: kernel Installed-Size: 88408 Maintainer: Sebastian Kuzminsky <[email protected]> Architecture: i386 Source: linux Version: 3.4.55-4linuxcnc Provides: linux-image, linux-modules-3.4-9-rtai-686-pae Depends: kmod | module-init-tools, linux-base (>= 3~), initramfs-tools (>= 0.99~) | linux-initramfs-tool Pre-Depends: debconf | debconf-2.0 Recommends: firmware-linux-free (>= 3~), libc6-i686 Suggests: linux-doc-3.4, debian-kernel-handbook, grub-pc | extlinux | lilo (>= 22.8-8.2~) Breaks: at (<< 3.1.12-1+squeeze1), initramfs-tools (<< 0.99~), lilo (<< 22.8-8.2~) Description: Linux 3.4 for modern PCs, RTAI The Linux kernel 3.4 and modules for use on PCs with one or more processors supporting PAE. . This kernel requires PAE (Physical Address Extension). This feature is supported by the Intel Pentium Pro/II/III/4/4M/D, Xeon, Core and Atom; AMD Geode NX, Athlon (K7), Duron, Opteron, Sempron, Turion or Phenom; Transmeta Efficeon; VIA C7; and some other processors. . This kernel includes the ShabbyX/memleak RTAI realtime patch set. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: ECS K8T890-A/K8T890-A, BIOS 080011 09/28/2005 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff] [ 0.000000] RAMDISK: 36084000 - 3703a000 [ 0.000000] ACPI Error: A valid RSDP was not found (20120320/tbxfroot-219) [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map f5884200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org [ 0.000000] Intel MultiProcessor Specification v1.1 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: TEMPLATE [ 0.000000] MPTABLE: Product ID: ETEMPLATE [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47 [ 0.000000] Processors: 1 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f77e5000 s48384 r0 d21248 u69632 [ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=61fb71ba-f4f0-4cc5-93a3-e489bea0494a ro nomodeset [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2096896 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1014972k/1048512k available (3495k kernel code, 33088k reserved, 1237k data, 416k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB) [ 0.000000] .data : 0xc1369d4a - 0xc149f480 (1237 kB) [ 0.000000] .text : 0xc1000000 - 0xc1369d4a (3495 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000 [ 0.000000] Interrupt pipeline (release #3) [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2199.943 MHz processor. [ 0.004001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.88 BogoMIPS (lpj=8799772) [ 0.004107] pid_max: default: 32768 minimum: 301 [ 0.004201] Security Framework initialized [ 0.004256] AppArmor: AppArmor disabled by boot time parameter [ 0.004323] Mount-cache hash table entries: 512 [ 0.004554] Initializing cgroup subsys cpuacct [ 0.004607] Initializing cgroup subsys memory [ 0.004664] Initializing cgroup subsys devices [ 0.004717] Initializing cgroup subsys freezer [ 0.004769] Initializing cgroup subsys net_cls [ 0.004821] Initializing cgroup subsys blkio [ 0.004877] Initializing cgroup subsys perf_event [ 0.004950] mce: CPU supports 5 MCE banks [ 0.005046] SMP alternatives: switching to UP code [ 0.007357] Freeing SMP alternatives: 16k freed [ 0.007456] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.009167] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.048950] CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 01 [ 0.156025] Performance Events: AMD PMU driver. [ 0.156124] ... version: 0 [ 0.156176] ... bit width: 48 [ 0.156228] ... generic registers: 4 [ 0.156279] ... value mask: 0000ffffffffffff [ 0.156332] ... max period: 00007fffffffffff [ 0.156384] ... fixed-purpose events: 0 [ 0.156435] ... event mask: 000000000000000f [ 0.168031] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.168110] Brought up 1 CPUs [ 0.168162] Total of 1 processors activated (4399.88 BogoMIPS). [ 0.168924] devtmpfs: initialized [ 0.169269] dummy: [ 0.169369] NET: Registered protocol family 16 [ 0.169506] node 0 link 0: io port [1000, ffffff] [ 0.169510] TOM: 0000000040000000 aka 1024M [ 0.169564] node 0 link 0: mmio [a0000, bffff] [ 0.169568] node 0 link 0: mmio [40000000, ffffffff] [ 0.169571] bus: [00, ff] on node 0 link 0 [ 0.169574] bus: 00 index 0 [io 0x0000-0xffff] [ 0.169577] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.169580] bus: 00 index 2 [mem 0x40000000-0xffffffff] [ 0.170262] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=6 [ 0.170314] PCI: Using configuration type 1 for base access [ 0.170979] bio: create slab <bio-0> at 0 [ 0.171100] ACPI: Interpreter disabled. [ 0.171192] vgaarb: loaded [ 0.171273] PCI: Probing PCI hardware [ 0.171325] PCI: Probing PCI hardware (bus 00) [ 0.171328] PCI: root bus 00: hardware-probed resources [ 0.171355] PCI host bridge to bus 0000:00 [ 0.171408] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.171462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.171516] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff] [ 0.171588] pci 0000:00:00.0: [1106:0238] type 00 class 0x060000 [ 0.171598] pci 0000:00:00.0: reg 10: [mem 0xce000000-0xcfffffff pref] [ 0.171663] pci 0000:00:00.1: [1106:1238] type 00 class 0x060000 [ 0.171704] pci 0000:00:00.2: [1106:2238] type 00 class 0x060000 [ 0.171744] pci 0000:00:00.3: [1106:3238] type 00 class 0x060000 [ 0.171785] pci 0000:00:00.4: [1106:4238] type 00 class 0x060000 [ 0.171825] pci 0000:00:00.5: [1106:5238] type 00 class 0x080020 [ 0.171885] pci 0000:00:00.7: [1106:7238] type 00 class 0x060000 [ 0.171928] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400 [ 0.171968] pci 0000:00:01.0: supports D1 [ 0.171986] pci 0000:00:02.0: [1106:a238] type 01 class 0x060400 [ 0.172055] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.172081] pci 0000:00:03.0: [1106:c238] type 01 class 0x060400 [ 0.172138] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.172164] pci 0000:00:03.1: [1106:d238] type 01 class 0x060400 [ 0.172221] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.172246] pci 0000:00:03.2: [1106:e238] type 01 class 0x060400 [ 0.172303] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.172328] pci 0000:00:03.3: [1106:f238] type 01 class 0x060400 [ 0.172385] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.172419] pci 0000:00:09.0: [168c:0013] type 00 class 0x020000 [ 0.172437] pci 0000:00:09.0: reg 10: [mem 0xfebf0000-0xfebfffff] [ 0.172519] pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f [ 0.172536] pci 0000:00:0f.0: reg 10: [io 0xec00-0xec07] [ 0.172547] pci 0000:00:0f.0: reg 14: [io 0xe800-0xe803] [ 0.172557] pci 0000:00:0f.0: reg 18: [io 0xe400-0xe407] [ 0.172567] pci 0000:00:0f.0: reg 1c: [io 0xe000-0xe003] [ 0.172577] pci 0000:00:0f.0: reg 20: [io 0xdc00-0xdc0f] [ 0.172587] pci 0000:00:0f.0: reg 24: [io 0xd800-0xd8ff] [ 0.172629] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a [ 0.172675] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f] [ 0.172731] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300 [ 0.172775] pci 0000:00:10.0: reg 20: [io 0xd400-0xd41f] [ 0.172806] pci 0000:00:10.0: supports D1 D2 [ 0.172809] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.172828] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300 [ 0.172871] pci 0000:00:10.1: reg 20: [io 0xd000-0xd01f] [ 0.172903] pci 0000:00:10.1: supports D1 D2 [ 0.172905] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.172925] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300 [ 0.172968] pci 0000:00:10.2: reg 20: [io 0xcc00-0xcc1f] [ 0.173000] pci 0000:00:10.2: supports D1 D2 [ 0.173002] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.173021] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300 [ 0.173065] pci 0000:00:10.3: reg 20: [io 0xc800-0xc81f] [ 0.173096] pci 0000:00:10.3: supports D1 D2 [ 0.173099] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.173118] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320 [ 0.173134] pci 0000:00:10.4: reg 10: [mem 0xfebefc00-0xfebefcff] [ 0.173193] pci 0000:00:10.4: supports D1 D2 [ 0.173196] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.173218] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100 [ 0.173279] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.173371] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.173393] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.173411] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.173429] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.173500] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.173607] pci 0000:02:00.0: [1002:7187] type 00 class 0x030000 [ 0.173624] pci 0000:02:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.173639] pci 0000:02:00.0: reg 18: [mem 0xfeaf0000-0xfeafffff 64bit] [ 0.173649] pci 0000:02:00.0: reg 20: [io 0xb800-0xb8ff] [ 0.173666] pci 0000:02:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref] [ 0.173689] pci 0000:02:00.0: supports D1 D2 [ 0.173712] pci 0000:02:00.1: [1002:71a7] type 00 class 0x038000 [ 0.173728] pci 0000:02:00.1: reg 10: [mem 0xfeae0000-0xfeaeffff 64bit] [ 0.173783] pci 0000:02:00.1: supports D1 D2 [ 0.173800] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.173869] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.173924] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] [ 0.173929] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.173935] pci 0000:00:02.0: bridge window [mem 0xabe00000-0xcbefffff pref] [ 0.173976] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.174073] pci 0000:00:03.1: PCI bridge to [bus 04-04] [ 0.174170] pci 0000:00:03.2: PCI bridge to [bus 05-05] [ 0.174267] pci 0000:00:03.3: PCI bridge to [bus 06-06] [ 0.175010] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.175216] pci 0000:00:11.0: VIA IRQ router [1106:3227] [ 0.175282] PCI: pci_cache_line_size set to 64 bytes [ 0.175368] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.175371] reserve RAM buffer: 000000003fff0000 - 000000003fffffff [ 0.175556] pnp: PnP ACPI: disabled [ 0.175609] PnPBIOS: Scanning system for PnP BIOS support... [ 0.175666] PnPBIOS: Found PnP BIOS installation structure at 0xc00f57f0 [ 0.175720] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x65ea, dseg 0xf0000 [ 0.175797] pnp 00:00: [mem 0x00000000-0x0009fbff] [ 0.175800] pnp 00:00: [mem 0x0009fc00-0x0009ffff] [ 0.175803] pnp 00:00: [mem 0x000e8000-0x000fffff] [ 0.175806] pnp 00:00: [mem 0x00100000-0x3ffeffff] [ 0.175808] pnp 00:00: [mem 0x3fff0000-0x3fffffff] [ 0.175811] pnp 00:00: [mem 0xe0000000-0xefffffff] [ 0.175814] pnp 00:00: [mem 0xfec00000-0xfec00fff] [ 0.175816] pnp 00:00: [mem 0xfecc0000-0xfecc0fff] [ 0.175819] pnp 00:00: [mem 0xff780000-0xffffffff] [ 0.175861] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved [ 0.175916] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved [ 0.175971] system 00:00: [mem 0x000e8000-0x000fffff] could not be reserved [ 0.176019] system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved [ 0.176074] system 00:00: [mem 0x3fff0000-0x3fffffff] has been reserved [ 0.176128] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.176183] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.176237] system 00:00: [mem 0xfecc0000-0xfecc0fff] could not be reserved [ 0.176292] system 00:00: [mem 0xff780000-0xffffffff] has been reserved [ 0.176347] system 00:00: Plug and Play BIOS device, IDs PNP0c01 (active) [ 0.176354] pnp 00:01: [io 0x0020-0x0021] [ 0.176357] pnp 00:01: [io 0x00a0-0x00a1] [ 0.176360] pnp 00:01: [irq 2] [ 0.176379] pnp 00:01: Plug and Play BIOS device, IDs PNP0000 (active) [ 0.176386] pnp 00:02: [dma 4] [ 0.176388] pnp 00:02: [io 0x0000-0x000f] [ 0.176391] pnp 00:02: [io 0x0080-0x0090] [ 0.176394] pnp 00:02: [io 0x0094-0x009f] [ 0.176396] pnp 00:02: [io 0x00c0-0x00de] [ 0.176414] pnp 00:02: Plug and Play BIOS device, IDs PNP0200 (active) [ 0.176422] pnp 00:03: [irq 0] [ 0.176425] pnp 00:03: [io 0x0040-0x0043] [ 0.176442] pnp 00:03: Plug and Play BIOS device, IDs PNP0100 (active) [ 0.176450] pnp 00:04: [irq 8] [ 0.176452] pnp 00:04: [io 0x0070-0x0071] [ 0.176472] pnp 00:04: Plug and Play BIOS device, IDs PNP0b00 (active) [ 0.176478] pnp 00:05: [irq 1] [ 0.176481] pnp 00:05: [io 0x0060] [ 0.176483] pnp 00:05: [io 0x0064] [ 0.176501] pnp 00:05: Plug and Play BIOS device, IDs PNP0303 (active) [ 0.176508] pnp 00:06: [irq 12] [ 0.176526] pnp 00:06: Plug and Play BIOS device, IDs PNP0f13 (active) [ 0.176549] pnp 00:07: Plug and Play BIOS device, IDs PNP0a03 (disabled) [ 0.176557] pnp 00:08: [io 0x0061] [ 0.176576] pnp 00:08: Plug and Play BIOS device, IDs PNP0800 (active) [ 0.176583] pnp 00:09: [irq 13] [ 0.176586] pnp 00:09: [io 0x00f0-0x00ff] [ 0.176604] pnp 00:09: Plug and Play BIOS device, IDs PNP0c04 (active) [ 0.176643] pnp 00:0a: [io 0x03f0-0x03f5] [ 0.176646] pnp 00:0a: [io 0x03f7] [ 0.176649] pnp 00:0a: [irq 6] [ 0.176651] pnp 00:0a: [dma 2] [ 0.176676] pnp 00:0a: Plug and Play BIOS device, IDs PNP0700 (active) [ 0.176846] pnp 00:0b: [io 0x0378-0x037f] [ 0.176849] pnp 00:0b: [io 0x0778-0x077a] [ 0.176851] pnp 00:0b: [irq 7] [ 0.176857] pnp 00:0b: [dma 3] [ 0.176895] pnp 00:0b: Plug and Play BIOS device, IDs PNP0401 (active) [ 0.176903] pnp 00:0c: [io 0x0290-0x0297] [ 0.176940] system 00:0c: [io 0x0290-0x0297] has been reserved [ 0.176994] system 00:0c: Plug and Play BIOS device, IDs PNP0c02 (active) [ 0.177002] pnp 00:0d: [io 0x04d0-0x04d1] [ 0.177005] pnp 00:0d: [io 0x0cf8-0x0cff] [ 0.177008] pnp 00:0d: [io 0x002e-0x002f] [ 0.177010] pnp 00:0d: [io 0x0290-0x029f] [ 0.177013] pnp 00:0d: [io 0x0a00-0x0a0f] [ 0.177016] pnp 00:0d: [io 0x0a20-0x0a2f] [ 0.177018] pnp 00:0d: [io 0x0a30-0x0a3f] [ 0.177021] pnp 00:0d: [io 0x0a40-0x0a4f] [ 0.177024] pnp 00:0d: [io 0x0000-0xffffffff disabled] [ 0.177027] pnp 00:0d: [io 0x0000-0xffffffff disabled] [ 0.177030] pnp 00:0d: [mem 0x00000000-0xffffffff disabled] [ 0.177033] pnp 00:0d: [mem 0x00000000-0xffffffff disabled] [ 0.177036] pnp 00:0d: [mem 0x00000000-0xffffffff disabled] [ 0.177039] pnp 00:0d: [mem 0x00000000-0xffffffff disabled] [ 0.177042] pnp 00:0d: [mem 0x00000000-0xffffffff disabled] [ 0.177045] pnp 00:0d: [mem 0x00000000-0xffffffff disabled] [ 0.177048] pnp 00:0d: [mem 0x00000000-0xffffffff disabled] [ 0.177051] pnp 00:0d: [mem 0x00000000-0xffffffff disabled] [ 0.177097] system 00:0d: [io 0x04d0-0x04d1] has been reserved [ 0.177152] system 00:0d: [io 0x0cf8-0x0cff] could not be reserved [ 0.177206] system 00:0d: [io 0x0290-0x029f] could not be reserved [ 0.177260] system 00:0d: [io 0x0a00-0x0a0f] has been reserved [ 0.177314] system 00:0d: [io 0x0a20-0x0a2f] has been reserved [ 0.177368] system 00:0d: [io 0x0a30-0x0a3f] has been reserved [ 0.177422] system 00:0d: [io 0x0a40-0x0a4f] has been reserved [ 0.177476] system 00:0d: Plug and Play BIOS device, IDs PNP0c02 (active) [ 0.177484] pnp 00:0e: [mem 0xe0000000-0xefffffff] [ 0.177522] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved [ 0.177577] system 00:0e: Plug and Play BIOS device, IDs PNP0c02 (active) [ 0.177618] system 00:0f: Plug and Play BIOS device, IDs PNP0c02 (disabled) [ 0.177691] pnp 00:10: [io 0x03f8-0x03ff] [ 0.177694] pnp 00:10: [irq 4] [ 0.177725] pnp 00:10: Plug and Play BIOS device, IDs PNP0501 (active) [ 0.177730] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver [ 0.179490] pci 0000:00:03.0: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000 [ 0.179495] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff pref] to [bus 03-03] add_size 200000 [ 0.179499] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03-03] add_size 200000 [ 0.179505] pci 0000:00:03.1: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000 [ 0.179509] pci 0000:00:03.1: bridge window [mem 0x00100000-0x000fffff pref] to [bus 04-04] add_size 200000 [ 0.179513] pci 0000:00:03.1: bridge window [mem 0x00100000-0x000fffff] to [bus 04-04] add_size 200000 [ 0.179519] pci 0000:00:03.2: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000 [ 0.179523] pci 0000:00:03.2: bridge window [mem 0x00100000-0x000fffff pref] to [bus 05-05] add_size 200000 [ 0.179527] pci 0000:00:03.2: bridge window [mem 0x00100000-0x000fffff] to [bus 05-05] add_size 200000 [ 0.179533] pci 0000:00:03.3: bridge window [io 0x1000-0x0fff] to [bus 06-06] add_size 1000 [ 0.179537] pci 0000:00:03.3: bridge window [mem 0x00100000-0x000fffff pref] to [bus 06-06] add_size 200000 [ 0.179541] pci 0000:00:03.3: bridge window [mem 0x00100000-0x000fffff] to [bus 06-06] add_size 200000 [ 0.179552] pci 0000:00:03.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.179556] pci 0000:00:03.0: res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000 [ 0.179559] pci 0000:00:03.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.179563] pci 0000:00:03.1: res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000 [ 0.179567] pci 0000:00:03.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.179570] pci 0000:00:03.2: res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000 [ 0.179574] pci 0000:00:03.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.179578] pci 0000:00:03.3: res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000 [ 0.179581] pci 0000:00:03.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.179585] pci 0000:00:03.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.179588] pci 0000:00:03.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.179591] pci 0000:00:03.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.179596] pci 0000:00:03.0: BAR 14: assigned [mem 0x40000000-0x401fffff] [ 0.179652] pci 0000:00:03.0: BAR 15: assigned [mem 0x40200000-0x403fffff pref] [ 0.179711] pci 0000:00:03.1: BAR 14: assigned [mem 0x40400000-0x405fffff] [ 0.179766] pci 0000:00:03.1: BAR 15: assigned [mem 0x40600000-0x407fffff pref] [ 0.179824] pci 0000:00:03.2: BAR 14: assigned [mem 0x40800000-0x409fffff] [ 0.179879] pci 0000:00:03.2: BAR 15: assigned [mem 0x40a00000-0x40bfffff pref] [ 0.179938] pci 0000:00:03.3: BAR 14: assigned [mem 0x40c00000-0x40dfffff] [ 0.180015] pci 0000:00:03.3: BAR 15: assigned [mem 0x40e00000-0x40ffffff pref] [ 0.180074] pci 0000:00:03.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.180129] pci 0000:00:03.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.180183] pci 0000:00:03.2: BAR 13: assigned [io 0x3000-0x3fff] [ 0.180238] pci 0000:00:03.3: BAR 13: assigned [io 0x4000-0x4fff] [ 0.180294] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.180356] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.180410] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] [ 0.180466] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.180522] pci 0000:00:02.0: bridge window [mem 0xabe00000-0xcbefffff pref] [ 0.180584] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.180638] pci 0000:00:03.0: bridge window [io 0x1000-0x1fff] [ 0.180695] pci 0000:00:03.0: bridge window [mem 0x40000000-0x401fffff] [ 0.180751] pci 0000:00:03.0: bridge window [mem 0x40200000-0x403fffff pref] [ 0.180813] pci 0000:00:03.1: PCI bridge to [bus 04-04] [ 0.180866] pci 0000:00:03.1: bridge window [io 0x2000-0x2fff] [ 0.180923] pci 0000:00:03.1: bridge window [mem 0x40400000-0x405fffff] [ 0.180979] pci 0000:00:03.1: bridge window [mem 0x40600000-0x407fffff pref] [ 0.181041] pci 0000:00:03.2: PCI bridge to [bus 05-05] [ 0.181095] pci 0000:00:03.2: bridge window [io 0x3000-0x3fff] [ 0.181780] pci 0000:00:03.2: bridge window [mem 0x40800000-0x409fffff] [ 0.181835] pci 0000:00:03.2: bridge window [mem 0x40a00000-0x40bfffff pref] [ 0.181897] pci 0000:00:03.3: PCI bridge to [bus 06-06] [ 0.181951] pci 0000:00:03.3: bridge window [io 0x4000-0x4fff] [ 0.182008] pci 0000:00:03.3: bridge window [mem 0x40c00000-0x40dfffff] [ 0.182064] pci 0000:00:03.3: bridge window [mem 0x40e00000-0x40ffffff pref] [ 0.182133] pci 0000:00:01.0: setting latency timer to 64 [ 0.182151] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 27 [ 0.182210] pci 0000:00:03.0: enabling device (0106 -> 0107) [ 0.182269] pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 31 [ 0.182329] pci 0000:00:03.1: enabling device (0106 -> 0107) [ 0.182385] pci 0000:00:03.1: PCI->APIC IRQ transform: INT B -> IRQ 31 [ 0.182444] pci 0000:00:03.2: enabling device (0106 -> 0107) [ 0.182503] pci 0000:00:03.2: PCI->APIC IRQ transform: INT C -> IRQ 39 [ 0.182563] pci 0000:00:03.3: enabling device (0106 -> 0107) [ 0.182619] pci 0000:00:03.3: PCI->APIC IRQ transform: INT D -> IRQ 31 [ 0.182677] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.182680] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.182683] pci_bus 0000:00: resource 6 [mem 0x40000000-0xffffffff] [ 0.182686] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.182689] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.182692] pci_bus 0000:02: resource 2 [mem 0xabe00000-0xcbefffff pref] [ 0.182695] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.182698] pci_bus 0000:03: resource 1 [mem 0x40000000-0x401fffff] [ 0.182701] pci_bus 0000:03: resource 2 [mem 0x40200000-0x403fffff pref] [ 0.182704] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.182707] pci_bus 0000:04: resource 1 [mem 0x40400000-0x405fffff] [ 0.182710] pci_bus 0000:04: resource 2 [mem 0x40600000-0x407fffff pref] [ 0.182713] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 0.182716] pci_bus 0000:05: resource 1 [mem 0x40800000-0x409fffff] [ 0.182719] pci_bus 0000:05: resource 2 [mem 0x40a00000-0x40bfffff pref] [ 0.182722] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 0.182725] pci_bus 0000:06: resource 1 [mem 0x40c00000-0x40dfffff] [ 0.182728] pci_bus 0000:06: resource 2 [mem 0x40e00000-0x40ffffff pref] [ 0.182781] NET: Registered protocol family 2 [ 0.182886] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.183143] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.183856] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.184272] TCP: Hash tables configured (established 131072 bind 65536) [ 0.184325] TCP: reno registered [ 0.184379] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.184442] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.184586] NET: Registered protocol family 1 [ 0.184663] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.184749] pci 0000:00:10.0: PCI->APIC IRQ transform: INT A -> IRQ 21 [ 0.184831] pci 0000:00:10.1: PCI->APIC IRQ transform: INT A -> IRQ 21 [ 0.184907] pci 0000:00:10.2: PCI->APIC IRQ transform: INT B -> IRQ 21 [ 0.184982] pci 0000:00:10.3: PCI->APIC IRQ transform: INT B -> IRQ 21 [ 0.185057] pci 0000:00:10.4: PCI->APIC IRQ transform: INT C -> IRQ 21 [ 0.185150] pci 0000:02:00.0: Boot video device [ 0.185156] PCI: CLS 64 bytes, default 64 [ 0.185206] Unpacking initramfs... [ 0.566386] Freeing initrd memory: 16088k freed [ 0.575398] audit: initializing netlink socket (disabled) [ 0.575465] type=2000 audit(1416313684.572:1): initialized [ 0.588887] highmem bounce pool size: 64 pages [ 0.588943] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.589118] VFS: Disk quotas dquot_6.5.2 [ 0.589192] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.589312] msgmni has been set to 1741 [ 0.589495] alg: No test for stdrng (krng) [ 0.589569] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.589628] io scheduler noop registered [ 0.589680] io scheduler deadline registered [ 0.589743] io scheduler cfq registered (default) [ 0.590193] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 0.590247] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.590301] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt [ 0.590357] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded [ 0.590378] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 0.590434] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded [ 0.590443] pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt [ 0.590500] pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded [ 0.590519] pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt [ 0.590575] pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded [ 0.590585] pcieport 0000:00:03.3: Signaling PME through PCIe PME interrupt [ 0.590641] pcie_pme 0000:00:03.3:pcie01: service driver pcie_pme loaded [ 0.590649] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.590721] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.590775] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.590937] isapnp: Scanning for PnP cards... [ 0.944579] isapnp: No Plug & Play device found [ 0.944665] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.948062] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.952062] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.952271] Linux agpgart interface v0.103 [ 0.952364] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0238] [ 0.953860] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xce000000 [ 0.954092] i8042: PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 [ 0.956161] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.956247] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.956382] mousedev: PS/2 mouse device common for all mice [ 0.956619] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.956722] rtc0: alarms up to one day, 114 bytes nvram [ 0.956892] TCP: cubic registered [ 0.956984] NET: Registered protocol family 10 [ 0.957230] Mobile IPv6 [ 0.957282] NET: Registered protocol family 17 [ 0.957338] Registering the dns_resolver key type [ 0.957424] Using IPI No-Shortcut mode [ 0.957556] PM: Hibernation image not present or could not be loaded. [ 0.957568] registered taskstats version 1 [ 0.957942] rtc_cmos 00:04: setting system clock to 2014-11-18 12:28:05 UTC (1416313685) [ 0.958079] Freeing unused kernel memory: 416k freed [ 0.958375] Write protecting the kernel text: 3496k [ 0.958447] Write protecting the kernel read-only data: 984k [ 0.972981] udevd[46]: starting version 175 [ 0.976952] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.003368] usbcore: registered new interface driver usbfs [ 1.003446] usbcore: registered new interface driver hub [ 1.031593] SCSI subsystem initialized [ 1.044294] usbcore: registered new device driver usb [ 1.044832] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.044926] ehci_hcd 0000:00:10.4: PCI->APIC IRQ transform: INT C -> IRQ 21 [ 1.044999] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 1.045073] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 1.045186] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebefc00 [ 1.046605] uhci_hcd: USB Universal Host Controller Interface driver [ 1.056100] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 1.056185] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.056239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.056298] usb usb1: Product: EHCI Host Controller [ 1.056351] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 1.056404] usb usb1: SerialNumber: 0000:00:10.4 [ 1.056523] libata version 3.00 loaded. [ 1.060174] hub 1-0:1.0: USB hub found [ 1.060235] hub 1-0:1.0: 8 ports detected [ 1.060625] uhci_hcd 0000:00:10.0: PCI->APIC IRQ transform: INT A -> IRQ 21 [ 1.060691] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 1.060752] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 1.060833] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400 [ 1.060922] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.060976] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.061034] usb usb2: Product: UHCI Host Controller [ 1.061087] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.061140] usb usb2: SerialNumber: 0000:00:10.0 [ 1.061860] hub 2-0:1.0: USB hub found [ 1.061917] hub 2-0:1.0: 2 ports detected [ 1.062886] uhci_hcd 0000:00:10.1: PCI->APIC IRQ transform: INT A -> IRQ 21 [ 1.062948] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 1.063006] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 1.063084] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000 [ 1.063169] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.063223] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.063281] usb usb3: Product: UHCI Host Controller [ 1.063334] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.063387] usb usb3: SerialNumber: 0000:00:10.1 [ 1.063630] microcode: AMD CPU family 0xf not supported [ 1.065876] hub 3-0:1.0: USB hub found [ 1.065933] hub 3-0:1.0: 2 ports detected [ 1.066892] pata_via 0000:00:0f.1: version 0.3.4 [ 1.066908] pata_via 0000:00:0f.1: PCI->APIC IRQ transform: INT A -> IRQ 20 [ 1.070529] scsi0 : pata_via [ 1.073688] scsi1 : pata_via [ 1.073785] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 1.073840] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 1.074048] sata_via 0000:00:0f.0: version 2.6 [ 1.074057] sata_via 0000:00:0f.0: PCI->APIC IRQ transform: INT B -> IRQ 20 [ 1.074147] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 1.077006] scsi2 : sata_via [ 1.079773] scsi3 : sata_via [ 1.079870] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20 [ 1.079925] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20 [ 1.080035] uhci_hcd 0000:00:10.2: PCI->APIC IRQ transform: INT B -> IRQ 21 [ 1.080108] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 1.080170] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 1.080250] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000cc00 [ 1.080343] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.080397] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.080455] usb usb4: Product: UHCI Host Controller [ 1.080508] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.080561] usb usb4: SerialNumber: 0000:00:10.2 [ 1.080720] hub 4-0:1.0: USB hub found [ 1.080775] hub 4-0:1.0: 2 ports detected [ 1.080898] uhci_hcd 0000:00:10.3: PCI->APIC IRQ transform: INT B -> IRQ 21 [ 1.080959] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 1.081016] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 1.081093] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c800 [ 1.081179] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.081233] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.081290] usb usb5: Product: UHCI Host Controller [ 1.081343] usb usb5: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.081397] usb usb5: SerialNumber: 0000:00:10.3 [ 1.081543] hub 5-0:1.0: USB hub found [ 1.081597] hub 5-0:1.0: 2 ports detected [ 1.280089] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.288108] ata1.00: ATA-7: ST3120814A, 3.AAE, max UDMA/100 [ 1.288163] ata1.00: 234441648 sectors, multi 16: LBA48 [ 1.372105] ata1.00: configured for UDMA/100 [ 1.372263] scsi 0:0:0:0: Direct-Access ATA ST3120814A 3.AA PQ: 0 ANSI: 5 [ 1.528610] ata2.00: ATAPI: LTN485S, JKU2, max UDMA/33, CDB intr [ 1.536447] ata2.00: configured for UDMA/33 [ 1.552180] scsi 1:0:0:0: CD-ROM LITEON CD-ROM LTN485S JKU2 PQ: 0 ANSI: 5 [ 1.584105] Switching to clocksource tsc [ 1.756059] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.926571] ata4.00: ATA-8: WDC WD1600AAJS-75M0A0, 02.03E02, max UDMA/133 [ 1.926625] ata4.00: 312500000 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.932753] ata4.00: configured for UDMA/133 [ 1.932865] scsi 3:0:0:0: Direct-Access ATA WDC WD1600AAJS-7 02.0 PQ: 0 ANSI: 5 [ 1.945619] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.945729] sd 0:0:0:0: [sda] Write Protect is off [ 1.945783] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.945806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.947648] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.947707] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.948209] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.948305] sd 3:0:0:0: [sdb] 312500000 512-byte logical blocks: (160 GB/149 GiB) [ 1.948432] sd 3:0:0:0: [sdb] Write Protect is off [ 1.948486] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.948519] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.950207] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.950324] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.950437] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.974444] sda: sda1 sda2 sda3 sda4 [ 1.974791] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.987575] sdb: sdb1 sdb2 < sdb5 > [ 1.987864] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.414754] microcode: AMD CPU family 0xf not supported [ 2.416836] microcode: AMD CPU family 0xf not supported [ 2.475020] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 4.271390] udevd[316]: starting version 175 [ 4.474200] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.623562] microcode: AMD CPU family 0xf not supported [ 4.790621] cfg80211: Calling CRDA to update world regulatory domain [ 4.850049] ACPI Exception: AE_BAD_PARAMETER, Thread 4140559808 could not acquire Mutex [0x1] (20120320/utmutex-276) [ 5.108209] [drm] Initialized drm 1.1.0 20060810 [ 5.360975] ath5k 0000:00:09.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 5.361089] ath5k 0000:00:09.0: registered as 'phy0' [ 5.456983] [drm] VGACON disable radeon kernel modesetting. [ 5.457647] pci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 24 [ 5.457867] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.457921] [drm] No driver support for vblank timestamp query. [ 5.457976] [drm] Initialized radeon 1.33.0 20080528 for 0000:02:00.0 on minor 0 [ 5.608592] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1 [ 5.923920] cfg80211: World regulatory domain updated: [ 5.923978] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.924037] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5.924096] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5.924154] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 5.924212] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 5.924270] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 5.924328] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 5.924386] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 5.924444] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 9.292882] ath: EEPROM regdomain: 0x10 [ 9.292886] ath: EEPROM indicates we should expect a direct regpair map [ 9.292889] ath: Country alpha2 being used: CO [ 9.292891] ath: Regpair used: 0x10 [ 9.323335] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.323698] ath5k phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41) [ 9.323755] ath5k phy0: RF5111 5GHz radio found (0x17) [ 9.323808] ath5k phy0: RF2111 2GHz radio found (0x23) [ 9.324346] cfg80211: Calling CRDA for country: CO [ 9.333484] cfg80211: Regulatory domain changed to country: CO [ 9.333541] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.333601] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 9.333659] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm) [ 9.333717] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2400 mBm) [ 9.333775] cfg80211: (5490000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 2400 mBm) [ 9.333833] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm) [ 10.173652] Adding 2095100k swap on /dev/sdb5. Priority:-1 extents:1 across:2095100k [ 10.186152] EXT4-fs (sdb1): re-mounted. Opts: (null) [ 10.374590] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 10.472579] loop: module loaded [ 11.668461] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.757086] nf_conntrack version 0.5.0 (16117 buckets, 64468 max) [ 11.925703] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.085777] wlan0: authenticate with 28:16:2e:13:55:01 [ 14.133772] wlan0: send auth to 28:16:2e:13:55:01 (try 1/3) [ 14.135627] wlan0: authenticated [ 14.161410] wlan0: associate with 28:16:2e:13:55:01 (try 1/3) [ 14.163074] wlan0: RX AssocResp from 28:16:2e:13:55:01 (capab=0x431 status=0 aid=1) [ 14.163846] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 14.163956] wlan0: associated [ 14.164017] cfg80211: Calling CRDA for country: US [ 14.169290] cfg80211: Regulatory domain changed to country: US [ 14.169348] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.169456] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 14.169514] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm) [ 14.169572] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm) [ 14.169630] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm) [ 14.169688] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 15.016179] RPC: Registered named UNIX socket transport module. [ 15.016241] RPC: Registered udp transport module. [ 15.016293] RPC: Registered tcp transport module. [ 15.016346] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.068580] FS-Cache: Loaded [ 15.098478] NFS: Registering the id_resolver key type [ 15.098555] FS-Cache: Netfs 'nfs' registered for caching [ 15.118128] Installing knfsd (copyright (C) 1996 [email protected]). [ 16.932013] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input2 [ 17.490642] lp: driver loaded but no devices found [ 17.493922] ppdev: user-space parallel port driver [ 17.736861] Bluetooth: Core ver 2.16 [ 17.737056] NET: Registered protocol family 31 [ 17.737109] Bluetooth: HCI device and connection manager initialized [ 17.737164] Bluetooth: HCI socket layer initialized [ 17.737216] Bluetooth: L2CAP socket layer initialized [ 17.737276] Bluetooth: SCO socket layer initialized [ 17.744885] parport_pc 00:0b: reported by Plug and Play BIOS [ 17.745017] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 17.774830] Bluetooth: RFCOMM TTY layer initialized [ 17.774889] Bluetooth: RFCOMM socket layer initialized [ 17.774942] Bluetooth: RFCOMM ver 1.11 [ 17.792721] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.792781] Bluetooth: BNEP filters: protocol multicast [ 17.843745] lp0: using parport0 (interrupt-driven). [ 24.258542] wlan0: no IPv6 routers present [10210.111448] EXT4-fs (sda4): recovery complete [10210.119229] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [10239.803821] EXT3-fs (sda1): warning: checktime reached, running e2fsck is recommended [10239.803880] kjournald starting. Commit interval 5 seconds [10239.803939] EXT3-fs (sda1): using internal journal [10239.803942] EXT3-fs (sda1): mounted filesystem with ordered data mode ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
