On Mon, 24 Nov 2014, a k wrote: > Date: Mon, 24 Nov 2014 13:29:12 -0800 > From: a k <pccncmach...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] 2.6.4---2.5.4 > > Hi > i am not out of woods- so far. > > i did move boards and narrow the problem. > 1st ---- i did put 5i20 --ONLY -- and system works as normal. > 2nd---- i did connect Y axis driver- to the system - To y axis motor drive > --and system works as normal. > I did connect Y axis to X axis motor drive and system --as normal. > I did connect Y axis to Z axis motor drive and system --as normal > > when i Try to connect X or Z axis to the any motor drive -- system > instantly change behavior -- axis froze and not click-able -- and after F2 > axis X or Z try to move automatically by them self and instantly ERROR show > up. > > > So , conclusion -- there are big difference between Y axis and axis X and > Z. > > i noticed that in the end HAL file it show that Y axis different from X and > Z axis. > why Y is different from X and Z and what to do with my problem? > > thank you
Are you using the _exact_ same .hal and .ini files copied (via usb drive or some other reliable method) from your working 2.5.4 installation? Peter Wallace Mesa Electronics ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
