On 12/1/14 12:15 AM, Mark Johnsen wrote: > Sebastian (and others) - thanks for the reply. I have a little voice in my > head since the Houston LinuxCNC Fest, "Update manuals where you can..." > :-)
Yep :-) > I'll make sure I get the cable pinout included in the manuals as I googled > a 9-pin dsub serial port to determine if pin 2 or 3 is the Tx or Rx, only > to find out after the fact that guessing would have been just as good as > the google images of 9-pin dsubs have no consistency. Some images show pin > 2 as Tx, some show pin 2 as Rx. That's no help... I think there are two things missing from the gs2_vfd manpage: * A description of modbus register settings needed on the GS2. This document probably has most of the info, but it should also be in the manpage: http://linuxcnc.org/docs/2.7/html/examples/gs2_example.html * The pinout of the RJ-12 "Serial Comm Port" on the GS2. A patch against 2.6 would be very welcome. Let me know if i can give you any help with it. :-) -- Sebastian Kuzminsky ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users